I ran into a problem at the weekend where I was going through a change to correct the BGP router ID's on some firewall clusters. I was following a specific procedure to do this and ensured I had full configuration backups of the firewalls with the output from a 'show configuration'. However, the configuration did not show the route redistribution that was setup using the web GUI on the Gaia firewall. This was an R77.30 Firewall cluster...
Is this expected behaviour that the 'show configuration' does not include the config of everything configured on the firewall? Incidentally, the cluster is now 80.20; I wonder if the show configuration includes the route redistribution commands?