- Products
- Learn
- Local User Groups
- Partners
- More
What’s New in Identity and Trust?
AI Security Masters
Security in the Pace of AI:
From Threat to Force Multiplier
CPX is Back!
Join us in Las Vegas, Vienna, and/or Bangkok!
Check Point Named a Leader
The Forrester Wave:
Enterprise Firewall Solutions, Q4 2026
What’s New in Agentic Network Orchestration
CheckMates Go:
Fun Ding
Hi,
I want to make Nat Rule for redundancy ISP for out going traffic. I have 2 ISP and Objects are Statically nated with their respective IP from ISP.I want configure a fail over nat rule. Is it possible or any other solution will be help full.
* ISPs are terminated in a Cisco Wan Switch and Checkpoint is connected directly with Wan Switch.
GW version 81.20
Is it a single ISP or the same ISP with two different NAT numbers?
If they are different ISPs, you should be able to accomplish this via ISP Redundancy.
See: https://support.checkpoint.com/results/sk/sk34812
Otherwise, you should use a Dynamic Object in your NAT rule instead (which is what ISP Redundancy ultimately does).
You'll need to write a script to update the contents of this Dynamic Object using the dynamic_objects CLI command on each gateway that uses this object.
However, this gives you flexibility as to how and when to "fail over" the NAT.
Is it a single ISP or the same ISP with two different NAT numbers?
If they are different ISPs, you should be able to accomplish this via ISP Redundancy.
See: https://support.checkpoint.com/results/sk/sk34812
Otherwise, you should use a Dynamic Object in your NAT rule instead (which is what ISP Redundancy ultimately does).
You'll need to write a script to update the contents of this Dynamic Object using the dynamic_objects CLI command on each gateway that uses this object.
However, this gives you flexibility as to how and when to "fail over" the NAT.
Thank you..
If i configure two IP from different ISPs in a sigle dynamic object.Does NAT will failover to another IP automatically if one ISP fail ?
Configuring more than one IP in a Dynamic Object used in this manner won't fail over.
The script you write will determine the failover conditions and what IP is used in what case.
When you say make NAT rules for ISP redundancy, you mean create different nat rules based on what subnets would go out of which ISP link?
Or did I misunderstand that totally?
Andy
In this case, you don't need two rules, you only need one...in terms of the Dynamic Object you've created.
The Dynamic Object will determine what the IP will ultimately be translated to.
Never knew that was possible...would you mind attach a screenshot of what nat rule would look like in case like that?
Cheers,
Andy
The "translated source" would contain the Dynamic Object you created.
It's otherwise like any other NAT rule.
Leaderboard
Epsum factorial non deposit quid pro quo hic escorol.
| User | Count |
|---|---|
| 9 | |
| 9 | |
| 7 | |
| 6 | |
| 6 | |
| 6 | |
| 5 | |
| 4 | |
| 3 | |
| 3 |
Tue 17 Nov 2026 @ 08:30 AM (EST)
Bogota Breakfast & Hack: IA bajo control y ataques en vivo con Workspace SecurityTue 17 Nov 2026 @ 05:00 PM (CET)
AI Security Masters: Security in the Pace of AI: From Threat to Force MultiplierTue 17 Nov 2026 @ 11:00 AM (EST)
Under the Hood: Check Point SASE | Troubleshooting Like a ProTue 24 Nov 2026 @ 01:30 PM (GMT)
La nueva realidad de los ataques DDoS: autonomía, escala y el futuro de la defensaTue 17 Nov 2026 @ 05:00 PM (CET)
AI Security Masters: Security in the Pace of AI: From Threat to Force MultiplierTue 17 Nov 2026 @ 11:00 AM (EST)
Under the Hood: Check Point SASE | Troubleshooting Like a ProTue 24 Nov 2026 @ 01:30 PM (GMT)
La nueva realidad de los ataques DDoS: autonomía, escala y el futuro de la defensaWed 02 Dec 2026 @ 03:30 PM (GMT)
The New DDoS Reality: Autonomy, Scale, and the Future of DefenseTue 17 Nov 2026 @ 08:30 AM (EST)
Bogota Breakfast & Hack: IA bajo control y ataques en vivo con Workspace SecurityAbout CheckMates
Learn Check Point
Advanced Learning
WE SECURE YOUR AI TRANSFORMATION