URL Filtering doesn't work

[cristo_munzenga]

Hi guys, I need all you support on a problem I'm facing.

I use Harmony Endpoint EPMaaS managing accessing the portal.

I installed an agent to a test machine running Windows and I tend to try the Web Filtering feature but I doesn't work at all. I created a group policy with only this machine added, set  URL Filtering as Prevent, tried category block and deny list, nothing worked. Even the demos from Demo Page are not being blocked, I tried.

The images attached show the way I built my deny list and how I set the policy.

Everytime I change the policy I go to the endpoint and update the client, doesn't work.

[lluner]

@cristo_munzenga 

Check if the implemented policy is the same on the client and on the portal.

[cristo_munzenga]

It's no the same, on the portal shows version 8 as can be seen in the post, but from the client the versions are as shown in the image.

[cristo_munzenga]

From the client shows a different version.

[lluner]

@cristo_munzenga 

Check if the machine is in the right policy zone. Check if the machine is in the correct policy. Enter the machine's name in the field marked with the arrow.

[cristo_munzenga]

@lluner

That's how it looks like.

[lluner]

@cristo_munzenga 

This machine is in another POLICY , that's why it's not working. This machine is on a different policy, which is why it's not working. The policy you mentioned is TEST WEB FILTER.

Could you confirm which policy the machine is under? You painted it black.