- Products
- Learn
- Local User Groups
- Partners
- More
Call For Papers
Your Expertise, Our Stage
Ink Dragon: A Major Nation-State Campaign
March 11th @ 5pm CET / 12pm EDT
AI Security Masters E4:
Introducing Cyata - Securing the Agenic AI Era
The Great Exposure Reset
AI Security Masters E3:
AI-Generated Malware
CheckMates Go:
CheckMates Fest
I am a little confused about the licensing and sizing that should be considered for CloudGuard Edge.
According to the CloudGuard Edge datasheet it indicates that the minimum features are CPU:1 RAM:1 Disk:1 but in the Release Notes for KVM/ESX it indicates CPU:2 RAM:2 Disk:3 (not configurable).
So would it be necessary to consider two CloudGuard Edge licenses (CP-CGE-NGTP-1X) as a minimum to deploy it on KVM/ESX?
Also, for sizing issues, how much throughput could be considered with 1vCPU or 2vCPU? Or any other suggestion for proper sizing?
Believe you'll want two cores (and two licenses), yes.
I suspect the actual throughput will depend on the strength of the underlying CPU, but I would guess we're talking a few hundred megabytes of NGTP throughput.
Hi PhoneBoy, Is there any Performance Test available that we can consider for this?? How can we do a proper (or at least estimate) sizing considering 1vCPU.
Would it be helpful to know what type of CPU has the 15xx appliances?? (I can't find any info)
SMB appliances use ARM CPUs, whereas CloudGuard Edge runs on Intel ones.
They’re not exactly comparable.
Also, pretty sure the R80.x versions of CloudGuard Edge require two cores.
The original datasheet was created with the R77.20 code, which could run on a single core.
Thank you very much for the information PhoneBoy. It is dissapointing that there is no further information on how to correctly sizing with Cloudguard Edge for EXSi/KVM. I hope soon Check Point can publish some reference performance data.
Did you raised this with your local partner/ CP local office?
There are performance figures published for specific SD-WAN appliances, but not "general" ones.
I know some additional performance testing is being done right now.
As Val suggested, recommend engaging through your local office.
Thanks @MikeB for the mention.
@rakesh_ar , please let me know how I can help.
Yes, I received a message from @Jeff_Engel from Check Point who helped me with sizing.
2 vCPU with a somewhat modern CPU and 2 GB of RAM should give you at least 300 Mbps of NGTX. But sure Check Point are willing to help you POC it and prove it out before any commitments are made.
Also, 1 vCPU and 1 GB RAM is possible but performance will be reduced a fair amount.
Leaderboard
Epsum factorial non deposit quid pro quo hic escorol.
| User | Count |
|---|---|
| 4 | |
| 4 | |
| 4 | |
| 2 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
Tue 03 Mar 2026 @ 04:00 PM (CET)
Maestro Masters EMEA: Introduction to Maestro Hyperscale FirewallsTue 03 Mar 2026 @ 03:00 PM (EST)
Maestro Masters Americas: Introduction to Maestro Hyperscale FirewallsTue 03 Mar 2026 @ 04:00 PM (CET)
Maestro Masters EMEA: Introduction to Maestro Hyperscale FirewallsTue 03 Mar 2026 @ 03:00 PM (EST)
Maestro Masters Americas: Introduction to Maestro Hyperscale FirewallsFri 06 Mar 2026 @ 08:00 AM (COT)
Check Point R82 Hands‑On Bootcamp – Comunidad DOJO PanamáAbout CheckMates
Learn Check Point
Advanced Learning
YOU DESERVE THE BEST SECURITY