NAT64 with R80.40
This is my first IPv6 implementation on Azure
Lab setup is
Ext win10: fd5d:7ce8:b6d5:1::4 (10.20.1.6)
fw Ext (eth0): fd5d:7ce8:b6d5:1::a14:205 (10.20.1.4)
fw Int (eth1): fd5d:7ce8:b6d5:2::4 (10.20.2.4)
My NAT64 rule is
Log shows xlate dst as expected but xlate_src is empty
fw6 monitor and tcpdump on eth0 shows fw is sending reset
Any help is appreciated!
You can see it listed as a known limitation here:
Appreciate your response. I read MDM, MUH v2 and IPv6 for Management interface are not supported. Security Gateway limitations mention about default kernel value and some commands. Please correct me if I missed the feature ID you are referring to.
Setup of (IPv6 LAN - Firewall - IPv6 LAN) end to end communication is working fine on Azure.
I redeployed everything locally with a 4600 appliance and seeing same behavior
I am wondering if any additional configuration is required for source NAT range to take effect.