R77.20.75 for SMB Appliances Now Available

[PhoneBoy]

We are happy to announce the R77.20.75 release for SMB appliances.

What's New in Check Point R77.20.75 for SMB Appliances

• New hardware model available for 730/750 and 1430/1450 appliances with a built in ADSL2+/VDSL2 modem
  • VDSL: G.993.1 (VDSL), G.993.2 (VDSL2), G.993.5 (VDSL2 Vectoring), G.998.4 (G.INP)
  • VDSL2 profiles: 8a, 8b, 8c, 8d, 12a, 12b, and 17a
  • ADSL: Annex A (POTS), Annex B (ISDN), G.992.1 (ADSL), G.992.3 (ADSL2), G.992.5 (ADSL2+), Annex M (ADSL2/2+), Annex L Reach-extended (ADSL2)
  • DSL Forum TR-067, TR-100, TR-114 conformity
  • IPoE or PPPoE Internet connection
  • Multiple connections over DSL
  • Static or dynamic IP
  • VDSL over PTM (EFM) with optional VLAN tagging
• VPN Enhancements
  • Route all traffic via VPN Site-to-Site to an SMB gateway
• SandBlast Threat Emulation Enhancements
  • E-mails received over POP3 protocol will now be scanned using SandBlast Threat Emulation
• Support administrator roles via RADIUS server authentication

For more information, refer to sk121758

[Heikki_Paananen]

After upgrade my 730 appliance, it got performance issue in upstream, it decreased 50M -> 2M. Anybody with similar experience?

[PhoneBoy]

I haven't noticed anything like that myself.

I recommend either starting a new thread explaining a little more about your configuration and/or engaging with the TAC: Contact Support | Check Point Software 

[G_W_Albrecht]

It would be very interesting to know the previous version(s) installed. Sometimes, upgrading the backup firmware image using USB medium and importing the configuration (or rebuilding config from scratch if easily possible) resolves such "inexplicable" issues .

[Burton_Peake]

I also had some performance issues, even after using the USB upgrade method. I ended up downgrading back to R75.20.71 and all my performance issues went away.