Who rated this post

cancel
Showing results for 
Search instead for 
Did you mean: 
Duane_Toler
Advisor

Yeah that's probably gonna be your better bet.  That'll be easier to manage with the extra options.

The output you uploaded had a curious item missing, tho.  "sh span vlan 340" didn't show the AP MAC address, but the AP could have been rebooting when you ran that command.  "show mac addr vlan 340" did show it later, tho, which is good.

All of your other outputs look good and as expected.  Since you moved the DHCP services and tested, now you know the DHCP issue was in the firewall policy.  Of course, now you have to get a wireless client on the VLAN 34x WLANs. 🙂

Be sure you have the FlexConnect VLANs added to that FlexConnect template and you should be good to go!  If you have any issues, "show mac addr vlan X" will be your best troubleshooting command on the switch, and "arp -n -i eth4.X" on the 3200 appliance.

Happy networking!

(1)
Who rated this post