cancel
Showing results for 
Search instead for 
Did you mean: 

Who rated this post

PhoneBoy
Admin
Admin

Properly setting the Link Selection and VPN community is required to ensure only the relevant VLANs are accessible and the VPN will transit the correct link.
You'll need appropriate PBR Routes for all of this for VLAN1-3.
Since you're talking about Default Route, make sure you're at least on R80.30.
VLAN2-4 should be able to talk assuming routes and Access Policy is defined appropriately.

You've not mentioned what should happen if one of these Internet connections fails.
The VPN would be most impacted by this, but I believe the other parts of this should work.

(1)
Who rated this post