weighted static routes on VSX

[AleLovaz82]

Hi
I've configured a routed based vpn with AWS ,and this is working fine.

Aws ask for a second tunnel on the same VS.

I need basically to add a second route for the same network with a different next-hop and a different weight.
Is this possible?
i've looked around in smart console and provisioning tool but i wasn't able to find an answer.

[Chris_Atkinson]

This is not possible with VSX in current versions.

Either utilise dynamic routing (BGP) or other approach / topology.

[AleLovaz82]

😞 😞 ,another limitation of vsx -.-'
thx anyway Chris 🙂

[Chris_Atkinson]

With R82+ changes are planned for VSX so stay tuned for those updates / improvements 

[AleLovaz82]

hi Chris, can you pls point me to some documents that explain how to configure bgp in a vsx enviroment with vti ?

the customer is pushing me to have both the tunnel to aws configured as aws said ,but i wasn't able to find any docs about dynamic routing and vti on vsx.

thx

[Chris_Atkinson]

GAiA CLI commands for BGP in the context of the specific VS should be mostly consistent with the applicable section of this article:

sk108958: How to configure IPsec VPN between on-premises Check Point Security Gateway and Amazon Web... 

Refer also:

https://sc1.checkpoint.com/documents/R81.10/WebAdminGuides/EN/CP_R81.10_VSX_AdminGuide/Topics-VSXG/C...