Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
jurgenvrieze
Participant

quantum gateway cluster to azure express route

One of our customers wants to create a Azure Express route connection. This customer has 2 datacenters strechted. On the first location the primairy Azure express route connection is delivered, on the other location the secondairy Azure express route path. The customer has a Quantum gateway cluster in a active-standby mode. Microsoft gives a /29 subnet for bgp routing, which is split into 2 /30 subnets . 

I'm unable to find some good documentation on this. Obviously I should have 3 ip's for the cluster interface, but that's not possible.  Using azure express route VPN, there must be something created like a VIP. I think that's also the case for this, but I'm not sure. Especially because I found that the RID should be the same as the VIP. I don't know how to configure this because I get 2 VIP's.

anyone that can point me in the right direction? Or should I go to dedicated routers for this (as we normally do). 

0 Kudos
2 Replies
the_rock
Legend
Legend

We have customer who has dedicated xpress route link. All we had to do back when we set it up is follow BGP documentation.

https://sc1.checkpoint.com/documents/R80.40/WebAdminGuides/EN/CP_R80.40_Gaia_Advanced_Routing_AdminG...

Andy

0 Kudos
emmap
Employee
Employee

You might be able to follow this documentation to set the VIP on the /30 given and then use a different subnet for the interface IPs. 

 

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events