error :SIC is not initialized either at the Security Management Server or the peer [ SIC error no. 1

[hlouae]

Hello Dear,

I'm facing an issue to establish SIC Communication between SMS and SG, I've tried to reset SIC on SG first it's OKey then I initialize SIC on from SMS the result "trust established" but when I try to apply the changes and click ok to SG on the SMS I get the bellow error : 

###############################################################

Checking connection with VSX
Generating VSX Configuration for V_DOMESTIQUE_S on Sne36sgwfw10.
Pushing VSX Configuration to Sne36sgwfw10.
Failed to configure Sne36sgwfw10 with the following errors:
Sne36sgwfw10... error :SIC is not initialized either at the Security Management Server or the peer [ SIC error no. 119 ] check that SIC is configured both on Security Management Server and peer, and that both have valid SIC certificates.
Virtual System Processing Completed with Errors

Pushing network configuration to Virtual System operation has finished with errors.
Refer to the messages retrieved during the VSX push configuration stage
and make sure that the configuration you are trying to push is legal.
If the problem persists contact Check Point Technical Support.

Operation has failed.

find in attachement the status on the SG checkpoint on the SMS 

Thanks

Hossam

[G_W_Albrecht]

I would suggest to contact TAC !

[HeikoAnkenbrand]

Have a look at the following sk110885:

"Failed to initialize SIC - [error no. 119]" error on SIC test failure 

[hlouae]

Hello Heiko,

thanks for sharing, in fact this SMS manages 2 other SG in cluster and this cluster is in open server mode which has 3 VS, plus the third SG  which is in standalone  we are facing the issue.

my question is according the solution proposed in this link "Failed to initialize SIC - [error no. 119]" error on SIC test failure

if I recreate the cp_mgmt certificate in SMS should I Reset SIC on all SG ? or only on SG affected