Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
lucaslight
Explorer
Jump to solution

VSX Cluster R81.10 | Status of Virtual Systems is "Active!" and "Down"

Hi All,

 

Recently I have deployed a VSX Cluster with VSLS version R81.10 in my lab.

I created 2 VSs and found that the status of the VS is "Active!" and "Down" as follows:-

R81.10_VSX Cluster with VSLS.JPG

I also deployed R80.40 VSX Cluster but it didn't have this issue. As follows:-

R80.40_VSX Cluster with VSLS.JPG

How to troubleshoot this?

 

Thanks.

0 Kudos
1 Solution

Accepted Solutions
Chris_Atkinson
Employee Employee
Employee

Most likely yes, some of the other commands will provide more meaningful output when run from the specific VS context.

CCSM R77/R80/ELITE

View solution in original post

0 Kudos
6 Replies
Chris_Atkinson
Employee Employee
Employee

Was a JHF applied to either environment or was this just the base image?

CCSM R77/R80/ELITE
0 Kudos
lucaslight
Explorer

R81.10 with latest JHF30.

0 Kudos
Chris_Atkinson
Employee Employee
Employee

Has policy been installed to all the virtual-systems including VS0 etc?

Could you please provide some additional outputs such as:

cphaprob state
cphaprob -i list
cphaprob -a if
vsx stat -v
cphaconf show_bond BOND_NAME 

CCSM R77/R80/ELITE
0 Kudos
lucaslight
Explorer

Hi Chris,

Yes, the policy has been installed to all vs as well as vs0:-

vsx stat -l.JPG

cphaprob stat.JPG

[Expert@VSX-GW01:0]# cphaprob -i list

There are no pnotes in problem state

[Expert@VSX-GW01:0]#
[Expert@VSX-GW01:0]# cphaprob -a if

vsid 0:
------
CCP mode: Manual (Unicast)
Required interfaces: 2
Required secured interfaces: 1


Interface Name: Status:

Mgmt UP
bond8 (S-LS) UP

S - sync, LM - link monitor, HA/LS - bond type

Virtual cluster interfaces: 1

Mgmt 10.0.3.113

 

vsx stat -v.JPG

[Expert@VSX-GW01:0]# cphaprob show_bond

|Slaves |Slaves |Slaves
Bond name |Mode |State |configured |link up |required
-----------+-------------------+------+-----------+--------+--------
bond8 | Load Sharing | UP | 2 | 2 | 1

Legend:
-------
UP! - Bond interface state is UP, yet attention is required
Slaves configured - number of slave interfaces configured on the bond
Slaves link up - number of operational slaves
Slaves required - minimal number of operational slaves required for bond to be UP

 

[Expert@VSX-GW01:0]# vsenv 1
Context is set to Virtual Device CIMB-VSX-GW01_Tier1 (ID 1).
[Expert@VSX-GW01:1]#
[Expert@VSX-GW01:1]# cphaprob show_bond

|Slaves |Slaves |Slaves
Bond name |Mode |State |configured |link up |required
-----------+-------------------+------+-----------+--------+--------
bond8 | Load Sharing | UP | 2 | 2 | 1
bond12 | Load Sharing | DOWN | 2 | 0 | 1
bond56.14 | Load Sharing | DOWN | 2 | 0 | 1

Legend:
-------
UP! - Bond interface state is UP, yet attention is required
Slaves configured - number of slave interfaces configured on the bond
Slaves link up - number of operational slaves
Slaves required - minimal number of operational slaves required for bond to be UP

 

[Expert@VSX-GW01:1]# cphaprob show_bond bond12

Bond name: bond12
Bond mode: Load Sharing
Bond status: DOWN

Balancing mode: 802.3ad Layer2 Load Balancing
Configured slave interfaces: 2
In use slave interfaces: 0
Required slave interfaces: 1

Slave name | Status | Link
----------------+-----------------+-------
g▒▒s▒▒▒▒▒x▒▒▒@▒▒s▒▒▒y▒d▒ | Active | No

 

Thanks.

0 Kudos
lucaslight
Explorer

Hi Chris,

 

Is it because link is down cause the status is down?

Thanks.

0 Kudos
Chris_Atkinson
Employee Employee
Employee

Most likely yes, some of the other commands will provide more meaningful output when run from the specific VS context.

CCSM R77/R80/ELITE
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events