Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
CyberBreaker
Contributor

VSX Bridge Mode in STP

Hi Guys, I would like to check with you if the CP in VSX bridge mode is also participating in STP negotiations when connected to switches? Thank you.

0 Kudos
1 Reply
Timothy_Hall
Champion
Champion

Not directly, all BPDUs received on a bridged interface are automatically forwarded as-is to all other interfaces of the same bridge group.  This process is controlled by the Gaia OS via sysctl variable net.bridge.bpdu_forwarding which is set to 1 by default and should generally be left that way.  So the firewall's bridge mode interfaces are essentially transparent to the adjacent switches performing STP with each other, and no special policy rule is required.

However in a VSX cluster, when a failover occurs a flood of special packets is generated on the newly-active member to ensure the switch's forwarding table is updated properly.  For more info on this special flooding behavior see sk71520: Failover in a bridge-mode VS in ClusterXL Active/Standby bridge state setup causes outage i....

 

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events