Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
m4_prashanth
Participant
Jump to solution

Traffic Egress Interface

Hi There,

 Is there any possibilities to check the traffic egress interface from Smart View Tracker or Smart Console?

I noticed that the logs shows the traffic inbound interface. If there is a way to view the outbound interface as well would be helpful for troubleshooting.

 

Thanks in Advance

0 Kudos
1 Solution

Accepted Solutions
Timothy_Hall
Legend Legend
Legend

Yes, set "Accounting" in addition to "Log" in the Track column of the relevant rule; this will show the egress interface as well as time connected, payload bytes sent/received etc.  Accounting updates are added to the original log entry every 10 minutes or whenever the connection ends by default.  Note that this will increase the logging load generated by the gateway and sent to the Log Server.

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com

View solution in original post

0 Kudos
1 Reply
Timothy_Hall
Legend Legend
Legend

Yes, set "Accounting" in addition to "Log" in the Track column of the relevant rule; this will show the egress interface as well as time connected, payload bytes sent/received etc.  Accounting updates are added to the original log entry every 10 minutes or whenever the connection ends by default.  Note that this will increase the logging load generated by the gateway and sent to the Log Server.

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events