Running the tcpdump on warp interface in VSX Gateway

[vikupoi_123]

Hi ,

If i will run the tcpdump in warp interface (which is source interface ) will i get the echo request and echo reply (Generating ping packet) ? 

For example if source server a.b.c.d routing  through  wrp220 interface  and destination : e.f.g.h is directly connected showing through eth3-03 interface and if i run tcpdump in VS5 as below 

tcpdump -i wrp220 -nn host a.b.c.d and host e.f.g.h . Should i get the echo request and echo reply both the packet with this command ? 

 Or 

if i run this command through "any" interface then it will show as below 

tcpdump -i any  -nn host a.b.c.d and host e.f.g.h.

[PhoneBoy]

Not sure if this is still true, but in the past, you would get unexpected behavior when tcpdumping the warp interface.
Best to do the relevant physical interface instead.

[Kaspars_Zibarts · Accepted solution]

Indeed the best bet prior USFW is to use physical interfaces instead of wrp - you either will get nothing or one way traffic only.

But USFW version seems to work also on wrp links

[vikupoi_123]

Hi Kaspers ,

Thank you after applying the wrp interface i am getting only echo reply not echo request .