Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Danny
Champion Champion
Champion

Maestro cabling to Serial Terminal Console Servers

I'm trying to connect several Check Point appliances with a 19" serial terminal console server.
I already found cabling documentation for Maestro MHO-140 appliances:

and for old Nokia IP390 appliances

I didn't find these for 15600 / 16600 appliances. Are these identical?

0 Kudos
6 Replies
_Val_
Admin
Admin

In my experience, standard Cisco cables always worked.

the_rock
Legend
Legend

I second what @_Val_ said...my experience was such as well.

0 Kudos
Danny
Champion Champion
Champion

Thanks. You mean these:

image.png

Ok, will try. In my experience it depends on the Pin-out settings of the serial terminal console server.

I'm using a 19" Perle STS8. (Pin-out overview)

0 Kudos
Timothy_Hall
Champion
Champion

The sky-blue Cisco console cables were what I called a "rollover" cable, and matches the pinout diagram you provided.

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
0 Kudos
Norbert_Bohusch
Advisor

On our digiport servers in our lab environment I have RJ45 pin-out, using normal lan kabels I go over distance, than have a RJ45 to DB9 connector which then connects using the cables delivered with the appliances (or blue cisco cables).

0 Kudos
Danny
Champion Champion
Champion

I ordered Cisco crossover adapters and attached them to standard patch cables.
This worked well with my Perle IOLAN STS Terminal Console Server.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events