R81.20 jumbo 90

[the_rock]

I installed it in my lab today, no issues so far, but will give it 24 hours. I do see lots of fixes listed in the official doc.

Andy

https://sc1.checkpoint.com/documents/Jumbo_HFA/R81.20/R81.20/Take_90.htm?tocpath=_____6

[Thomas_Eichelbu]

Hello Folks, 

yesterday i have updated a MGMT server from R81.10 HAF 150 to HFA 81.20 HFA 92/HFA96.
i saw that after installing HFA92 SmartLog in SmartConsole stopped working.
i saw log without any HFA installed, but after installing HFA92 and later HFA96, no more logs .. in SmartViewTracker they could be seen.



there are many SK regarding "no logs", also when this file open dialog is empty.
its about some broken symbolic links ... 
sk182574
sk167511
sk172915
sk167895
i tried to follow all Sk about this issue ... made no difference

then TAC told me and said it could be a know issue with HFA greater 90 ... 
interessting!

i will uninstall and install HFA89 again ... then i will report back!

btw, HFA >90 runs already on some of my customer MGTM´s, no issue so far.

[AkosBakos]

Hi @Thomas_Eichelbu 

The load on the SmartCenter is normal, or higher than before the upgrade?

Akos