This Open Server has not been certified yet, maybe one day it will be done, but we still had to use the box and get R80.10 installed. The client has an HP Enterprise agreement (lots of open servers installed) and they purchased 6 of these boxes for this phase of the HW refresh. We had configured another box (3 weeks ago) and installed R77.30 using SK108200 with a max root partition of 2048 GB (max 2T root partition) in built in the HP Array controller. It is presently working hard as a MLM box processing high volumes of logs. Our Diamond Engineer told us of an internal SK that has the exact errors in the attachment - line for line - but it was for R77.30 - we had already made it past that issue with the R77.30 builds.
After spend several hours in the datacenter today, we found the cause of the python error in the doAutoConfigure script - the HP 440 Array Controller 2 TB array setting (configured like the above box) was causing the issue - we wiped out the array, built another one with a 1980 GB root partition, made it bootable, rebooted with no UEFI, and kicked off the install routine - it worked perfectly. After the installation completed, we rebooted several times with no errors. The webui and bond config will occur on 6/12, testing will begin shortly afterwards.