- Products
- Learn
- Local User Groups
- Partners
-
More
Join Us for CPX 360
23-24 February 2021
Important certificate update to CloudGuard Controller, CME,
and Azure HA Security Gateways
How to Remediate Endpoint & VPN
Issues (in versions E81.10 or earlier)
IDC Spotlight -
Uplevel The SOC
Important! R80 and R80.10
End Of Support around the corner (May 2021)
Hi,
When configuring ClusterXL, do I need to have an IP pool of 3 IPs from the ISP for the external port configuration?
1 for WAn of gateway 1
1 for WAn of gateway 2
1 for VIP.
If my ISP has only given me one IPthen how will I configure IP of external interfaces + VIP?
Here is how you can configure one public IP address on cluster of usual appliances (not SMB):
Hi,
We have a 5100 device.
Here is how you can configure one public IP address on cluster of usual appliances (not SMB):
In the case of only one public IP address, refer to Configuring Cluster Addresses on Different Subnets.
You configure the cluster IP as the public IP and use private IPs for the gateway IPs.
Do we know if this limitation has gone away with the new release of R80.20.10 for SMB appliances (embedded gaia). Can we do scopelocal on smb devices now?
About CheckMates
Learn Check Point
Advanced Learning
WELCOME TO THE FUTURE OF CYBER SECURITY