Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
DinushaDS
Participant
Jump to solution

Quantum Spark 1570 WAN link time to time down

Product: Quantum Spark 1570

OS : R81.10.10

Issue : 

bolage issue333.png

There is a Quantum Spark 1570 Gateway, It's WAN Port to connected Point to point link (25MB) it's connected to Head office. DNS & PABX services getting from Head office. Internet also have this link.

DMZ Port to connected 1G Internet link all users internet getting from using this link. Default route created for the this link side. 

The issue is time to time these links are down after a few minutes it's getting normal. but the internet is not disconnected it's effected by Voice. 

Notifications are shown as below,

bolage issue.png

 

 

That time Internet side links are showing like this.

Routing is configured like this

22222222.png

Both Links were also checked with the ISP, and they said there were no any issues with the links.

Please give a solution for this one. 

0 Kudos
1 Solution

Accepted Solutions
PhoneBoy
Admin
Admin

The reason given in the logs for the WAN failover is "high latency."
You may, therefore, wish to adjust this setting higher so it doesn't fail over.
Or change the probing hosts to something on the ISP itself (versus these public DNS servers).

View solution in original post

0 Kudos
(1)
8 Replies
PhoneBoy
Admin
Admin

How are the following things configured in Device > Network > Internet?

  • On the Internet Connections themselves (The Internet Connection(s) > Edit > Connection Monitoring)
  • In the Configure Monitoring link

Note that you may want to adjust these thresholds based on your environment.

DinushaDS
Participant

1G Internet Connection Configurations : 

Screenshot 2024-10-01 173356.png

Screenshot 2024-10-01 173433.png

 

Point to Point Head Office Connecting Link Configurations:

2.png

2.1.png

Routing Table in below

22222222.png

 

0 Kudos
PhoneBoy
Admin
Admin

You missed one of the pieces of information I asked for.
Here's where to find it with a screenshot:

image.png

The defaults for this look something like:

image.png

If you have sensitive data here (i.e. the specific hosts), mask that before posting. 
If it looks like the above, you might want to adjust this based on your specific needs.

DinushaDS
Participant

I didn't change any configurations here. It's like bellow :

3.png 

0 Kudos
PhoneBoy
Admin
Admin

The reason given in the logs for the WAN failover is "high latency."
You may, therefore, wish to adjust this setting higher so it doesn't fail over.
Or change the probing hosts to something on the ISP itself (versus these public DNS servers).

0 Kudos
(1)
DinushaDS
Participant

Configured the Monitoring link DNS Now It's working. I think the issue was resolved. 

333.PNG

 

I Monitored after the configured Monitoring link DNS, WAN links didn't go down. I checked one hour, and it's not got the link down.  before the Monitoring link DNS configurations, it's down every 10 to 5 minutes.   

 

 

Notifications.PNG

Thanks for the Support.

0 Kudos
Chris_Atkinson
Employee Employee
Employee

What "Probing settings" are configured?

If DNS server ping is selected for example via which link/s are those reachable...

CCSM R77/R80/ELITE
DinushaDS
Participant

The head office side DNS Server is Reachable, the Head office side AD is also Reachable & Voice is also working from the head office side PABX Issue is from time to time Voice is not working. 

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events