Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Ihenock1011
Collaborator
Jump to solution

Qos configuration in checkpoint vsx

Hi All,

I'm looking to set up Quality of Service (QoS) on my Check Point R81.10 security gateway. However, I was informed that QoS might not be supported in the Virtual System Extension (VSX) environment. I need to confirm if it's possible to configure QoS in my specific setup and would appreciate guidance on achieving this.

Thanks,

0 Kudos
1 Solution

Accepted Solutions
PhoneBoy
Admin
Admin


From R81, it appears QoS is supported with VSX: https://support.checkpoint.com/results/sk/sk79700
In earlier versions, only “light QoS” was supported (setting DSCP tags but not actually doing traffic shaping).

https://sc1.checkpoint.com/documents/R81.10/WebAdminGuides/EN/CP_R81.10_QoS_AdminGuide/Topics-QoSG/I...

View solution in original post

0 Kudos
1 Reply
PhoneBoy
Admin
Admin


From R81, it appears QoS is supported with VSX: https://support.checkpoint.com/results/sk/sk79700
In earlier versions, only “light QoS” was supported (setting DSCP tags but not actually doing traffic shaping).

https://sc1.checkpoint.com/documents/R81.10/WebAdminGuides/EN/CP_R81.10_QoS_AdminGuide/Topics-QoSG/I...

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events