PBR help please

[Nenad_Odic]

Dear friends i have never done PBR in Checkpoint so i need help suggestions for this concrete question.

I have read the SK's so i have some kind of understanding.

What baffles me is as you see in attach i have one internal network that should communicate with DC and it does.

Now we got second ISP ISP2 on the drawing,  i  want to send all internet traffic from that 1.1.1.1 LAN to that ISP2.

all other networks are going to internet to ISP1.

i have in static routes 0.0.0.0 next hop ISP1

and for the communication with DC i have x.x.x.x next hop some internal gw.

everything works .

Now i want to send\receive  internet traffic from 1.1.1.1 to ISP2 and not to disrupt communication with DC.

Hope i was clear and simple.

thanks in advance 🙂

[PhoneBoy]

Create an Action Table specifying ISP2's default route.
Create a policy rule that references this table something like below.
Only the source(s) specified will be routed to ISP2.

[Nenad_Odic]

Thanks for help,

i have tried this kind of settings but than my communication from 1.1.1.1 to DC is broken .Internet works.

so do i have to have more than one rule or table regarding the dc communication?

Please help

thank you

[G_W_Albrecht]

I would suggest to contact CP TAC to get this resolved!