I have an ospf area created between pairs of cisco 6807s, cisco 9500s and checkpoint 28000s (r81.10 JHF 66)
((cisco 6807 <--> (eth3-04) CP28000 (eth3-01) <--> cisco 9500))
PTP connections between the cisco devices and the Firewalls.
I have a vlan(s) hosted on the 6807s, advertised through OSPF, and other vlan(s) on the 9500s. These vlans are configured the same on the cisco boxes (obviously different subnets).
On the firewall, I see the 6807 vlan(s) and they work, but the vlan(s) from the 9500s are showing up as Hidden / Inactive (although I do see them in the route table on the 6807s).
on the fw:
>show route ospf all
O x.x.0.0/28 via y.y.0.73, eth3-04, cost 1001, age 34609, instance default (6807 hosted)
O x.x.0.16/28 via y.y.0.73, eth3-04, cost 1001, age 34609, instance default (6807 hosted)
O H i x.x.0.32/28 is an unusable route (9500 hosted)
O H i x.x.0.48/28 is an unusable route (9500 hosted)
O H i x.x.64/28 is an unusable route (9500 hosted)
O H i y.y.0.72/31 is an unusable route (9500 hosted)
O H i y.y.0.74/31 is an unusable route (9500 hosted)
>show ospf interfaces
Name IP Address Area ID State NC DR Interface BDR Interface Errors
eth3-04 y.y.0.72 0.0.0.60 P2P 1 N/A N/A 1
eth3-01 y.y.0.75 0.0.0.60 P2P 1 N/A N/A 0
on the 6807s
#show ip route
O x.x.0.32/28 [110/1101] via y.y.0.72, 09:45:30, TenGigabitEthernet7/15
O x.x.0.48/28 [110/1101] via y.y.0.72, 09:45:30, TenGigabitEthernet7/15
O x.x.0.64/28 [110/1101] via y.y.0.72, 09:45:30, TenGigabitEthernet7/15
on the 9500s
#show ip route
O x.x.0.0/28 [110/1101] via y.y.0.75, 09:45:05, TenGigabitEthernet2/1/2
O x.x.0.16/28 [110/1101] via y.y.0.75, 09:45:05, TenGigabitEthernet2/1/2
I have involved TAC, but no resolution as of yet.
Any ideas i can look at?
