How to temporary stop VS in both VSX cluster Node 1 and Node 2

[maildpak]

Hi,

I have 3 Virtual System in VSX Cluster (Node 1 and Node 2)

Virtual Devices Status on each Cluster Member
=============================================

I want to temporarily shut VS 3 and not delete it.

It should be persistent and should not get enabled, when the gateways reboot

===================

I tried to use "clusterXL_admin down -p" on one of the VSX and it worked fine. But when I tried on other, it gives error "Like HA not started"

Infact it will not allow to shut VS on both node, Is there a way to achieve this without impacting the pther VS in the cluster.

As of now on 1 VSX I have used "clusterXL_admin down -p" and on the other cpstop.

Thanks

Deepak

[Chris_Atkinson]

Are you trying to run the clustering commands after the cpstop was performed?

Do you have access to control / isolate this on the network/switch/VLAN side as an alternative?

[JozkoMrkvicka]

1. Install any-any-any-drop rule as #1 on VS3

2. Shutdown all interfaces on VS3

3. cronjob @reboot "vsenv 3;cpstop"