HealthCheck Point - MTU Error

[Piet_vd_Maas]

In the HCP Report we see the following error:

MTU configuration problem on interface eth1-01, config_active_mtu value is 1500 which is greater than parent interface bond1 MTU: 1360

MTU configuration problem on interface eth1-02, config_active_mtu value is 1500 which is greater than parent interface bond1 MTU: 1360

When I try this issue to change the interface on eth1-01 , I get the following error:

NMSETH0029 eth1-01 is a member of a bonding group and it's MTU can't be changed. Please change MTU via bonding interface

 This is exactly we did to fix MTU issues.

Is there a way to fix this, or in the configuration or in the reporting?

[G_W_Albrecht]

Have you installed HCP Update 11 - Take 58 ?

[Piet_vd_Maas]

HCP Take: 58

HCP RPM Build: hcp-1-592021.i386

[G_W_Albrecht]

This is on the SMS ?

[Piet_vd_Maas]

This is an error in the report of a Security Gateway generated from the HCP extension on the SMS.

Version on the SMS and Security Gateway are similar.

[G_W_Albrecht]

Moved the post to gateways - no SMS issue, but HCP output from GW shows one !