Hardware diagnostic - Gateway 23000

[FabioLima1]

Hello people,
Could you tell me the sk to do the hardware diagnosis in a gateway 23000. Is it possible to do this diag remotely?

Thanck You.

[PhoneBoy · Accepted solution]

I'd start with HCP: https://support.checkpoint.com/results/sk/sk171436 

[Chris_Atkinson · Accepted solution]

The following additional resources should be helpful here depending on your objectives:

sk97251: Using the Check Point Appliance Hardware Diagnostic Tool

sk121447: How to perform an automated health check of a Gaia based system

[G_W_Albrecht · Accepted solution]

You can use the Diagnostic Tool from the LCD panel or connect to the Console port with a Terminal emulation program. So you will need remote access to a unit connected to the console port that as an own internet connection (not over gateway).

[FabioLima1]

Thank You.