Guidance Needed: R82 T34 ClusterXL Bridge Mode Causing Loops & Crashes

[Balakrishna_Med]

Hello Team,

We have recently deployed Check Point R82 Take 34 in bridge mode with ClusterXL (Active/Standby).

After a couple of hours, both gateways crashed. We observed:

• Packet loops forming

• Connections multiplying abnormally

When we reconfigured the cluster in Active/Active mode, everything worked as expected.

Environment data flow:

• Perimeter firewall (Active/Passive) → Core switch (Active/Passive) → Check Point (Active/Active) → Aggregator switch

Additional details:

• The firewall is operating in bridge mode.

• On the core switch, STP is enabled, and it cannot be disabled on the ports connected to the Check Point appliances.

• We are also noticing that SIP telephones restart every 1–1.5 hours, which seems to be related to this issue.

Request:
Could someone please guide me on the correct switch port configurations when connecting to Check Point in bridge mode? I want to avoid trial-and-error in the production environment.

Thanks in advance for your support.

[PhoneBoy]

ClusterXL bridge mode requires two or four switches per the documentation: https://sc1.checkpoint.com/documents/R81.20/WebAdminGuides/EN/CP_R81.20_Installation_and_Upgrade_Gui... 

With a single switch, Active/Active + STP is likely your best option, at least based on what I've seen in the past.

[Balakrishna_Med]

Hope there is issue with bridge mode in R82. not working