Factory reset button on 2200 appliance

[Sebastian_Nasse]

I have bought a firewall 2200 applicance second hand and would like to know how to reset it. It seems you have to reset it in a cli, which I can't access. It has a reset button, but it is not mentioned in the manual. Anyone knows anything about this? Thank you in advance! Cheers.

/Sebastian

[Sebastian_Nasse]

By the way, I have tried the button by pushing it for 10 seconds while booting, also for a long time when appliance is on. It seems to not respond at all to the button.

[PhoneBoy]

That button is not a factory reset button.

What you'll need to do is:

• Download the tool ISOmorphic: How to install SecurePlatform / Gaia from a USB device on Check Point appliance and Open Servers usi... 
• Download an installation ISO, e.g.: Check Point R80.10 
• Use the ISOmorphic tool on a Windows machine to burn the installation ISO to a USB thumb drive
• Stick the thumb drive into the appliance and power it up
• Use the serial console to interact with the device and ensure the device is reloaded with a fresh OS image

[Sebastian_Nasse]

Thank You!

It threw me in the wrong direction because of it saying ”Factory Reset”. Then I will focus on the solution you gave me.

/Sebastian

[Jerry]

indeed forget mate about the reset - just do the CP2200 from scratch using usb-drive with R80.10 and off you go

ps. keep in mind that only 2 cores on 2200 are not going to give you a super speedy GAIA off the box. Plus 2GB or RAM is also not really a great option, If I were you I'd make a really simplest deployment and do not turn on IPS on that device (it will literally make that device a bottleneck in your network) - unless it is for LAB purposes only.

Cheers

Jerry