Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
BrunoMarques21
Contributor
Jump to solution

Error install R81.10 with ISOmorphic Quantum 3600 appliances

I'm using the ISOmorphic tool to install R81.10 on the Quantum 3600 appliances firewall.

I'm following this link https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk65205 

I'm using option 3

------------------
1 - Boot from local disk
2 - 2000, 4000, 12000, 13000, 21000 series
3 - 3000, 5000, 6000, 7000, 15000, 16000, 23000, 26000, 28000 series
4 - Smart-1 5/25/50/200/400/525/600/625/3000/5000/6000
5 - Smart-1 150
6 - TE 250/TE1000/100X/250X/1000X/2000X
7 - 41000, 44000, 61000, 64000
8 - UTM-1, Power-1, DLP-1, VSX-1, IPS-1, Connectra, IP series
9 - Open Server with ACPI support
10 - Open Server without ACPI support
11 - Open Server with ACPI support (VGA)
12 - Open Server without ACPI support (VGA)
Default is 1, press <tab> for a list of options.
boot:

 


But I'm getting the error message below:

Traceback (most recent call last):
File "/usr/bin/anaconda", line 585, in ?
import dispatch
File "/usr/lib/anaconda/dispatch.py", line 36, in ?
from upgrade import upgradeMountFilesystems
ImportError: cannot import name upgradeMountFilesystems
install exited abnormally [1/1]
sending termination signals...done
sending kill signals...done
disabling swap...
unmounting filesystems...
/mnt/runtime done
disabling /dev/loop0
/mnt/source done
disabling /dev/loop2
/proc done
/dev/pts done
/sys done
/tmp/ramfs done
/mnt/usb_source done
/selinux done
You may safely reboot your system

Would you help me?

0 Kudos
1 Solution

Accepted Solutions
BrunoMarques21
Contributor

The problem was on the pendrive, I created through another pendrive the ISO R81.10 and installed it successfully on the firewall.

Thanks

View solution in original post

2 Replies
RamGuy239
Advisor
Advisor

One way around it would be to simply download the R80.40 or R81 ISO, do the clean install and simply use the R81.10 blink image to do a re-image to R81.10 afterwards.

I'm not sure what software your 3600 appliance is already running? If it's already running R80.40 and it has the XFS file system already in place you could simply do the blink clean-install through SSH or WebUI on it instead of using USB and Isomorphic.

You can verify if you have the XFS filesystem by running either "cat /etc/fstab" or "df -hT" using expert mode through console or SSH and verify the file system on lv_current and lv_log.

Certifications: CCSA, CCSE, CCSM, CCSM ELITE, CCTA, CCTE, CCVS, CCME
0 Kudos
BrunoMarques21
Contributor

The problem was on the pendrive, I created through another pendrive the ISO R81.10 and installed it successfully on the firewall.

Thanks

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events