Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
ESpataro
Contributor
Jump to solution

Disk Space issues on Gateway

I am trying to clear some disk space on one of our Gateways as teh Var/log area is 88% used.

 

However I am unsure on which files can be safely deleted , below is an output showing the directories which seem to be taking up space and they seem to older versions of checkpoint. These may be old files from previous upgrades but I am not sure

 

any help appreciated 

 

Expert@xxxx-xxx:0]# du -h --max-depth=1 /var/log/opt | sort -n -r
832K    /var/log/opt/CPcvpn-R80.30
665M    /var/log/opt/CPsuite-R80.20
380K    /var/log/opt/CPcvpn-R80.20
192K    /var/log/opt/CPshrd-R80
112M    /var/log/opt/CPsuite-R80
20G     /var/log/opt
8.8G    /var/log/opt/CPsuite-R80.30
7.1M    /var/log/opt/CPshrd-R80.30
5.2M    /var/log/opt/CPshrd-R80.20
5.1G    /var/log/opt/CPshrd-R80.40
2.2M    /var/log/opt/CPcvpn-R81.10
2.1G    /var/log/opt/CPsuite-R80.40
1.8G    /var/log/opt/CPshrd-R81.10
1.5M    /var/log/opt/CPcvpn-R80.40
1.5G    /var/log/opt/CPsuite-R81.10

0 Kudos
1 Solution

Accepted Solutions
G_W_Albrecht
Legend
Legend

CP special tipp:

I would suggest to run the following command as well:

find / -type f -size +100000 -exec ls -lh {} \; 2> /dev/null | awk '{ print $NF ": " $5 }' | sort -nk 2,2

This will display all files greater than 10MB and sort them in a readable and understandable way.

CCSE CCTE CCSM SMB Specialist

View solution in original post

16 Replies
PhoneBoy
Admin
Admin

Deleting any of the directories is not recommended.
Might try something like the following: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...

ESpataro
Contributor

Thanks , I have seen this sk article , but I have been told that this script is not compatible with R81.10 unfortunately 

0 Kudos
the_rock
Legend
Legend

I always do something like this. First, run df -h and see what dir is the "fullest". Then, say it shows its /var/log at, for argument sake, at 90% capacity, do something like this:

find /var/log -size +500000000c 

That will look for ANY files bigger than 500 MB in /var/log. You can apply same method for any dir and any file size.

Andy

 

ESpataro
Contributor

Thanks Andy , the issue I have though knowing which files can be safely deleted , as you can see from my output above , for example

 

8.8G    /var/log/opt/CPsuite-R80.30 - this directory is taking up 8.8G
within these directories I am not sure which files are safe to delete

0 Kudos
the_rock
Legend
Legend

Ok, got it...can you run find command on that dir? So say find /var/log/opt/CPsuite-R80.30 -size +500000000c

Andy

ESpataro
Contributor

This what I get from that output 

[Expert@xxxx-xxx:0]# find /var/log/opt/CPsuite-R80.30 -size +500000000c
/var/log/opt/CPsuite-R80.30/fw1/log/2020-09-05_000000.log
/var/log/opt/CPsuite-R80.30/fw1/log/2020-09-04_000000.log
/var/log/opt/CPsuite-R80.30/fw1/log/2021-02-01_000000.log
/var/log/opt/CPsuite-R80.30/fw1/log/2020-08-16_000000.log
/var/log/opt/CPsuite-R80.30/fw1/log/2020-08-17_000000.log

0 Kudos
ESpataro
Contributor

Is it safe to delete the above files ?

0 Kudos
the_rock
Legend
Legend

Its from 2021 and 2020, Covid years my friend : - ). I think safe to delete.

G_W_Albrecht
Legend
Legend

CP special tipp:

I would suggest to run the following command as well:

find / -type f -size +100000 -exec ls -lh {} \; 2> /dev/null | awk '{ print $NF ": " $5 }' | sort -nk 2,2

This will display all files greater than 10MB and sort them in a readable and understandable way.

CCSE CCTE CCSM SMB Specialist
Daniel_Kavan
Advisor

Has anyone seen kcore file, ok to delete?

find / -type f -size +100000000 -exec ls -lh {} \; 2> /dev/null | awk '{ print $NF ": " $5 }' | sort -nk 2,2
/opt/CPsuite-R81.20/fw1/te_file_analyzer/proc/kcore: 128T
/proc/kcore: 128T
/var/log/aspose/opt/CPsuite-R81.20/fw1/aspose_jail/proc/kcore: 128T
/var/log/files_repository/Archive_Tool/8785455D-CDCA-49C6-B22F-D9325B260629/601178/proc/kcore: 128T

 

Ok to remove these 81 & 81.10 files, now that I"m no 81.20?

/var/log/CPda/repository/CheckPoint#Major#All#6.0#5#2#R81_T392/Check_Point_R81_T392_Fresh_Install_and_Upgrade_v1.tgz: 3.4G
/var/log/CPda/repository/CheckPoint#Major#All#6.0#5#3#R81.10_ignis_main_T335/Check_Point_R81.10_T335_Fresh_Install_and_Upgrade.tgz: 3.4G
/var/log/CPda/repository/CheckPoint#Major#All#6.0#5#4#R81.20_ivory_main_T631/Check_Point_R81.20_T631_Fresh_Install_and_Upgrade.tgz: 3.7G
/var/log/CPda/repository/CheckPoint#Major#All#6.0#5#3#BLINK_R81_10_T335_JHF_T45_GW/Blink_image_1.1_Check_Point_R81.10_T335_JHF_T45_SecurityGateway.tgz: 5.2G

0 Kudos
Daniel_Kavan
Advisor

Thanks!

Also, any harm getting rid of older stuff in the repository?  /var/log/CPda/repository    I have some R80.40 and R81 files not to mention R81.10 now.

 

How about these older R80.40 .dat files?

/var/log/files_repository/Raw_Files/D100C612-9D05-48AA-9F2A-F8C42528F100/600400/te_eu_fireball_11_9_990000400_600400.tgz: 505M
/var/log/opt/CPsuite-R81/fw1/log/mq_mng.elg: 657M
/var/log/opt/CPshrd-R80.40/cpview_services/CPViewDB_1616105839.dat: 853M
/var/log/opt/CPshrd-R80.40/cpview_services/cpview_services.dat: 872M
/var/log/opt/CPshrd-R80.40/cpview_services/CPViewDB_1600974992.dat: 879M
/var/log/opt/CPshrd-R80.40/cpview_services/CPViewDB_1611009647.dat: 927M
/var/log/opt/CPshrd-R81/cpview_services/CPViewDB_1628947028.dat: 953M

0 Kudos
the_rock
Legend
Legend

I always delete whatever is there after the upgrade. Maybe you can confirm 100% with TAC if its safe, but I never had any issues after deleting old files form that dir. Just make sure NOT to delete any files from dir called LastTake (cant recall where its located now, I think under /var/log as well), as that would affect next jumbo install.

Andy

0 Kudos
the_rock
Legend
Legend

@Daniel_Kavan , here is dir I was referring to (do NOT delete anything from here)

[Expert@CP-gw:0]# find / -name LastTake
/opt/CPda/backup/CheckPoint#CPUpdates#All#6.0#5#4#BUNDLE_R81_20_JUMBO_HF_MAIN#26/LastTake
[Expert@CP-gw:0]#

Hugo_vd_Kooij
Advisor

I find that cpview tends to leave about large files. Yesterday I was upgrading a cluster of 3100 appliances and /var/log was filled at 81%

In /var/log/opt/CPshrd-R80.40 there was a bunch of 5 large ond cpview_xxxxxxxxx.dat files. and getting rid of them lowered disk usage in /var./log to 31%

As far as old logs go if your gateway is supposed to send them of to the SmartCenter then any set of log files indicate connectivity iissues where the gateway is unable to send logs to the SmartCenter. If that happens a lot you need to investigate why this happens. As a normal safeguard you should  configure logging to forwar live logging but aalso roud up the logs once a day in case stuff gets left behind.

There is a bunch of notes that I must put infto some best practises documents some day. Propably also put it into a nice Ansible playbook as a lot of cleaning up can be automated in my view.

(Just don't hold you breath on it. It's on a too long to-do list.)

<< We make miracles happen while you wait. The impossible jobs take just a wee bit longer. >>

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events