Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Hari122939_
Participant
Jump to solution

Connmonitor Problem

Hello Team,

 

I have integrated successfully the 2 Quantum Spark 1600 Security Gateways(R80.20.50) with Security Management Server(R80.40) and cluster formation also complete successfully .I gave "cphaprob -l list" command in one of cluster member. The device shows "Connmonitor" error and its state is "Problem".

 

Please anyone give a solution for this problem.

0 Kudos
1 Solution

Accepted Solutions
Hari122939_
Participant

I have connected with checkpoint technical support team and they shared the below document. So, our issue also resolved. 

https://support.checkpoint.com/results/sk/sk176108

 

Thank You For replying

View solution in original post

(1)
4 Replies
the_rock
Legend
Legend

Not certain if same clustering commands work as they do on regular Gaia OS, but give it a go from expert mode on both members and please share the output.

Best,

Andy

cphaprob roles

cphaprob state

cphaprob -a if

cphaprob -i list

cphaprob -l list

cphaprob syncstat

cphaprob mvc

0 Kudos
Hari122939_
Participant

I have connected with checkpoint technical support team and they shared the below document. So, our issue also resolved. 

https://support.checkpoint.com/results/sk/sk176108

 

Thank You For replying

(1)
the_rock
Legend
Legend

Thanks for following up, great job!

Andy

0 Kudos
ma_gorkhali
Participant

Just an FYI , Faced up similar issue in 1550 appliance. Disabling and enabling back the probe settings solved the issue. You do not need to disable it permanently incase if you need the probe to work.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events