Configuration palo alto vpns on checkpoint gateway in active/standbay

[Steven26]

In the first instance, help is required to set up 3 Site to Site VPNs, whose objective is to establish MEX-COL communication when our MPLS channel goes down, however the peculiarity is that there are 3 sites that will be available as in an active mode. standby and consequently 2 and 3 will be a backup when 1 falls.

[PhoneBoy]

An actual network diagram of what you're trying to achieve will help.
You mention Palo Alto gateways...please ensure to notate them on the diagram.

[Steven26]

At the moment I only have this diagram.

[PhoneBoy]

That doesn't tell me what the expected traffic flows are and what vendor gateways are involved here (especially since you mention Palo Alto).
The more information you can provide about the proposed configuration, the more likely we can suggest the correct approach.

[the_rock]

We need more info as far as traffic involved.

Andy

[the_rock]

See if below post helps, though might be different subject...

Andy

https://community.checkpoint.com/t5/Security-Gateways/VPN-Check-Point-Palo-Alto-issue/m-p/217215#M41...