- Products
- Learn
- Local User Groups
- Partners
- More
CheckMates Fifth Birthday
Celebrate with Us!
days
hours
minutes
seconds
Join the CHECKMATES Everywhere Competition
Submit your picture to win!
Harmony Mobile 4:
New Version, New Capabilities
As YOU DESERVE THE BEST SECURITY
Upgrade to our latest GA Jumbo
CheckFlix!
All Videos In One Space
You could try VPN Link Selection in Load Sharing mode. According to the FAQ here (https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...) it will only create one VPN Tunnel and balance the packets between the different links.
My goal was to find a way to use both internet connections at the same time.
You can use ISP Redundancy for LAN to WAN Traffic und VPN Load Sharing (https://sc1.checkpoint.com/documents/R80.30/WebAdminGuides/EN/CP_R80.30_SitetoSiteVPN_AdminGuide/htm...) for Site2Site VPN Traffic
Pretty sure this is not among the features supported, see: https://community.checkpoint.com/t5/Product-Announcements/R81-10-EA-Program-Production/ba-p/110053
Mostly likely this exact configuration is an RFE and I encourage you to bring it through your local Check Point office.
Hi PhoneBoy,
I don't know if the local office will be able to support me on this. We need to look elsewhere, disaggregation maybe? Just think how useful would be to have the control plane (VRF, virtual router..etc) in ClusterXL? 😍
not sure about this, but could you not just run x2 GRE tunnels through the Checkpoints?
About CheckMates
Learn Check Point
Advanced Learning
YOU DESERVE THE BEST SECURITY