Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Marek_Pietrulew
Participant
Jump to solution

CPview and Top-connections in R80.20

Hi,

 

We recently upgraded from 80.10 to 80.20 and noticed that BW Top-Connections view has been removed from Cpview. There is only top-connections information in regards to CPU utilization.

 

Where can we quickly get BW top-connections info in R80.20 from cli?

 

Regards,

Marek

1 Solution

Accepted Solutions
PhoneBoy
Admin
Admin

Just to update this thread: we've added this back to R80.40 JHF 69 and above.
Believe it will also be added to future R80.30 and R80.20 JHF releases. 

View solution in original post

22 Replies
Adam_Zidiker
Employee Alumnus
Employee Alumnus

Hey Marek

I'm Adam from diagnostics (Owners of CPView)

Top-Connections by network was indeed removed on R80.20 due to change in GW architecture

We're working on adding it back

But I'm pretty sure you can view that and more from SmartConsole

Thanks

miguel
Participant

Hi Adam,

 

Is this still in the works? Any ETA?

What workaround(s) exist to get this functionality back any other way?

 

Thanks,

PhoneBoy
Admin
Admin
Mauricio_Hurtad
Participant

 will this command be appropriated to provide similar output as CPVIEW?

 

For RX traffic:

rtm monitor -f interface  interface,in -k src -v ab -k dst -k svc

 

For TX traffic:

rtm monitor -f interface Interface,in -k src -v ab -k dst -k svc

 

Both directions

rtm monitor -f interface  interface,both -k src -v ab -k dst -k svc

Martin_Valenta
Advisor

Will it be back with r80.30 or with some jfa take? Without Monitoring blade license we cannot monitor it and previously it was easily visible in CPView..

Dawei_Ye
Collaborator
packet size was also removed .
Will it be added back too?
Peter_Lyndley
Advisor
Advisor
Will this be added back soon please ?
PhoneBoy
Admin
Admin

Just to update on this, it looks like we are planning to add this back into an R80.40 Jumbo in the near future.
This will be backported to R80.20/R80.30 jumbos as well.

0 Kudos
JozkoMrkvicka
Mentor
Mentor

Why there is no support for IPv6 in CPview ?

Kind regards,
Jozko Mrkvicka
0 Kudos
PhoneBoy
Admin
Admin
Not sure what the plan is for adding IPv6 support in cpview.
0 Kudos
miguel
Participant

Hi Phoneboy, and Adam,

 

Been two months since the last update. R80.40 Jumbo came out in March and doesn't have this fix.

 

Is there an ETA on a version with Top-connections back?

 

Also, in SmartView you get some weird results with source column resolving an IP or something to a weird string of characters that is definitely not a PTR lookup. Is there a way to turn off name resolution for SmartView so we can see the source IP?

PhoneBoy
Admin
Admin

Just to update this thread: we've added this back to R80.40 JHF 69 and above.
Believe it will also be added to future R80.30 and R80.20 JHF releases. 

Sigbjorn
Advisor
Advisor

Any updates on this fix for R80.30?

0 Kudos
Sigbjorn
Advisor
Advisor

Take 221:

PRJ-11045,
PRJ-11046,
ACCL-417
Gaia OS UPDATE: CPView Network -> Top-Protocols and Network -> Top-Connections tabs were added back. Refer to sk167903.

 

Thanks! 😄

0 Kudos
S_E_
Advisor

Hi,

Is it really added back ?

On R80.40 Take 83 we can see top-connections again

On R80.40 Take 91 it is not visible and the sk167903 named it as fixed but provides a workaround with manual creating files and rebooting it.

So the question is: Does it come back 'out of the box' in a future HF ? Or will this be a workaround.

Thanks

Regards

 

 

 

0 Kudos
PhoneBoy
Admin
Admin

We changed the implementation of it, which I assume is why those changes are needed to be made to simkern.conf.
I don't believe we typically touch those sorts of files when installing JHF, which is why it needs to be manually applied.

0 Kudos
moritz_r
Participant
Participant

Hi,

someting is wrong with this feature.
I have followed the instruction in sk167903, only the total packet or Mbits output is there, but it shows now connection at all.

The gateway is running r80.40 with take 118 in an test vm environment. maybe that is the issue?

Best regards

Moritz

2021-06-11 16_26_15-sgfw1.jpg

0 Kudos
PhoneBoy
Admin
Admin

Recommend a TAC case here.

0 Kudos
maad-pul
Participant

Hi,

What about "CPView Network -> Top-Protocols and Network -> Top-Connections" in VSX environment? 

Have this command been supported in VSX earlier? Any information about upcomming releases, not working in 80.40 JHF87.

Thanks,
Mattias

0 Kudos
Nandhakumar
Contributor

@PhoneBoy Still I could see this feature is not available in R81.10. Can you advise here? Do we need to follow any SK or something to enable this feature?

0 Kudos
Martin_Valenta
Advisor

it's still over SK and updating fwkern.conf unfortunately, somebody really don't want to have it enabled by default 😄

0 Kudos
shais
Employee
Employee

Hi,

To enable the top connections / top protocol view in network tab, please follow sk167903.

Indeed its not enabled yet by default as this feature have lite performance impact and during our internal testing we found its not required by most customers.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events