Bonding Interface CP Problem when connect to 2 different device

[Adity12]

Hi All,

Have a good day.

I faced some issues with bonding the interface with mode LACP to 2 different devices.

when this LACP connects to 2 different devices, it will cause some segment network can't be accessible from CP.

we use 2 interfaces 10 GB for 1 bond.

when we disable 1 of these interfaces, that segment network can access but slowly.

Currently, I using Checkpoint 15600 with R80.10 take 154

Here is the following topology.

If the explanation is not clear, please let me know.

Thanks Regards

Dio Aditya Pradana

[Chris_Atkinson]

What are the switches, are they running VSS/VPC/MLAG or something else?

Note R80.10 reached end of support some time ago and an upgrade is recommended.

[Adity12]

Hi @Chris_Atkinson

We are using switch from juniper with series QFX5120-48Y and running ESI-LAGs

[Chris_Atkinson]

Are the LACP rate and hashing parameters aligned?

Also can you share the output of "show asset network" ?