- Products
- Learn
- Local User Groups
- Partners
-
More
It's Here!
CPX 360 2021 Content
Check Point Harmony
Highest Level of Security for Remote Users
Important certificate update to CloudGuard Controller, CME,
and Azure HA Security Gateways
Advanced Protection for
Small and Medium Business
Secure Endpoints from
the Sunburst Attack
Important! R80 and R80.10
End Of Support around the corner (May 2021)
Most of the commands @Timothy_Hall came up with for troubleshooting performance on regular gateways work as-is on SMB appliances.
One required modification as the Busybox version of netstat doesn't support the required option, but you can get the information another way.
I will admit that I'm not sure how useful these commands are on an SMB appliance given the limited tuning options on SMB appliances.
That said, I took a few minutes to figure it out and document it on the off chance it is.
These commands must be executed in expert mode.
Should work whether the appliance is locally or centrally managed.
fwaccel stat
fwaccel stats -s
grep -c ^processor /proc/cpuinfo
awk '/:/ { print($1,$5, $13) }' < /proc/net/dev
fw ctl affinity -l -r
fw ctl multik stat
cpstat os -f multi_cpu
Correction:
fwaccel stats -s
And i would rather have the last lines output only once:
cpstat os -f multi_cpu
I would add here another very useful command:
# fw ctl pstat
watch -n 1 "cpstat os -f multi_cpu" is better
About CheckMates
Learn Check Point
Advanced Learning
WELCOME TO THE FUTURE OF CYBER SECURITY