SNMPV3 TRAPS PORT 162

[K_montalvo]

Hello experts,

I have a very basic knowledge of SNMP, i looking to know if theres a way to see where SNMP traps are stored (if they are stored witch i really don't know) or maybe to see them working live via CLI. I'm speaking this visualizing it from the SMB firewall point.

Thanks!

[G_W_Albrecht]

sk90860: How to configure SNMP on Gaia OS

sk40622: SNMPv3 USM (User-based Security Model) User

sk98552: Best Practices - SNMP

sk90470: Check Point SNMP MIB files

sk65923: How to configure the cluster to send SNMP Trap upon failover

sk170155: SMB appliances report incorrect value for SNMP sysObjectID

sk171750: Security Gateway stops responding to SNMP polling requests after an upgrade to R80.20.15

sk153054: OID polling does not show expected results on SMB Appliances with version R77.20.86

[K_montalvo]

@G_W_Albrecht Hello buddy thank you for posting very helpful information. What i am actually looking to do is be able to track just for troubleshooting trying to see the SMNP trap being sent to the SNMP manager (NMS). The manager witch is a SIEM-Splunk would indexed listening on port162 and then operator would be able to query from there. But actually im just curious to learn where can i see this actually when sent to the (NMS).

[G_W_Albrecht]

I can only point to where it is configured on SMBs: https://sc1.checkpoint.com/documents/SMB_R80.20.40/Help/Locally_Managed/EN/Topics/SNMP.htm?Highlight...

[K_montalvo]

@G_W_Albrecht Yes i was able to see that with the previous provided links. For that i will normally use snmp walk commands , however im looking to see them from the other part when they are sent via port 162 SNMPv3.

[G_W_Albrecht]

So you did configure that all on SMB but you see no alerts from traps in NMS ?