Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
bcmario
Explorer

SMB1530 - Second ISP has no internet under Load Balance option

I have two servers which are directly connected to the LAN interface of the firewall.

I have two ISPs one which is connected to the WAN interface and the other connected to the 5th port on the LAN (LAN port has been assigned to the internet)

My requirement is to give the two servers individual ISP connections.

Server 1 handled by ISP 1 (WAN)

Server 2 handled by ISP 2 (WAN5)

 

But when I configure this setup (as Load Balancing mode), I have no internet connectivity on ISP 2 (WAN5)

Can anyone help me with this? I have attached screenshots of the relevant scenario.

 

0 Kudos
3 Replies
PhoneBoy
Admin
Admin

Did you use tcpdump to determine if the ping went out the right interface?

0 Kudos
bcmario
Explorer

I have not used tcpdump so far but I did use source ping ( ping -I ) on the second ISP interface.

Since there is no DMZ interface on SMB 1530 I have converted the LAN5 to internet, this LAN5 port once converted turns into WAN5. Therefore I have used the interface name as WAN5 when using source ping.

ping -I WAN5 8.8.8.8

0 Kudos
PhoneBoy
Admin
Admin

Please confirm with a tcpdump this command is doing what you expect it to.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events