SMB configure WAN default GW via CLI

[D_W]

Hi Mates,

I cannot find the CLI syntax to define the Default Gateway (of the WAN Port/Internet Connection) for SMB 1500-2000 - R81.10.10.
Is it possible to configure it via CLI?

Cheers,
Dave

[AkosBakos]

Hi @D_W 

I'm not 100% sure, this setting is available in CLI. MAybe @G_W_Albrecht  knows the answer without test GW:-)

To configure a default route:

1. Go to Device > Local Network page.

2. Select an interface and click Edit.

   The Edit window opens in the Configuration tab.

3. Click the DHCP Server options tab.

4. In the Default Gateway section, do one of these:

   • Click Use this gateway's IP address as the default gateway.

   • Select Use the following IP address and enter an IP address.

5. Click Apply.

https://sc1.checkpoint.com/documents/SMB_R80.20.20/AdminGuides/Locally_Managed/EN/Topics/Configuring...

Akos

[G_W_Albrecht]

https://sc1.checkpoint.com/documents/SMB_R81.10.X/CLI/EN/Content/Topics/add-internet-connection-inte...

add internet-connection name "<name>" interface WAN type static default-gw <default-gw> ipv4-address <ipv4-address> mask-length <mask-length>