I'm having trouble setting the default gateway behind another interface but the WAN on my SMB.
For our customer's SMB 770 installation I need to use the following interface config:
WAN: DHCP IP
LAN1: fixed IP + by default traffic needs to be routed this way
LAN2: fixed IP
I configured the following:
1) Internet1 = DHCP, but without "route traffic through this interface by default"
2) LAN2: no issue there, it's just a LAN interface with a connected network
And tried adding the default gateway via LAN1:
1) Configured LAN1 IP in the WebUI (but I'd need to add the default route, which does not accept 0.0.0.0/0).
2) Next I tried adding interface IP and GW via CLI:
set interface LAN1 ipv4-address x.x.x.x mask-length 24 default-gw x.x.x.y
Should be simple, but this returns the error "Failed to find the requested interface"
What am I missing here?