Remote Access VPN to DMZ

[brizio1971]

HI,

I have configure Remote Access VPN on my 1550 appliance, on this firewall I have configure a LAN (10.1.0.0/24) on Ethernet 1 port and a DMZ (192.168.200.0/24) on Ethernet 2 port.

The VPN work correctly from laptop using Endpoint VPN connection and I can access to alle LAN device but Im not able to connect the DMZ device, why ?

There are any particular configuration to connect from VPN to DMZ ?

Thanks

Fabrizio

[PhoneBoy]

What precisely happens when you try to connect to the DMZ over VPN?
What, if anything, shows up in the logs when this occurs?
If you investigate the routing table on the VPN client, do you see a route for the DMZ present?

By default, this should be allowed…assuming you haven’t changed certain default configurations (like the encryption domain).
If you’re using a Strict access policy, you might need an explicit rule to permit such communication.

[brizio1971 · Accepted solution]

Issue solved was a cable problem, thx