R81.10.05 Locally Managed Advanced Settings

[G_W_Albrecht]

Here you can find the complete R81.10.05 Locally Managed Advanced Settings:

Attribute Name	Type	Value	Description
Acceleration Settings - Acceleration state enabled	bool	true	Indicates whether acceleration is enabled
Admin Lockout - Mobile application session timeout	int	30	Allowed mobile application session before automatic logout is executed (in days)
Admin Lockout - Mobile seamless login session timeout	int	1	Allowed mobile application seamless login session before automatic logout is executed (in days)
Administrators RADIUS authentication - Default Shell	options	Clish	Default shell for super administrators. To enable this feature please contact Check Point support.
Administrators RADIUS authentication - Local authentication (RADIUS inaccessible)	bool	false	Perform local administrator authentication only if RADIUS server is not configured or is inaccessible.
Aggressive aging - Aggressive aging enforcement method	options	Both	Choose when aggressive aging timeouts are enforced
Aggressive aging - Connection table percentage limit	int	80
Aggressive aging - Enable aggressive aging of connections	bool	true
Aggressive aging - Enable reduced timeout for ICMP connections	bool	true
Aggressive aging - Enable reduced timeout for TCP handshake	bool	true
Aggressive aging - Enable reduced timeout for TCP session	bool	true
Aggressive aging - Enable reduced timeout for TCP termination	bool	true
Aggressive aging - Enable reduced timeout for UDP connections	bool	true
Aggressive aging - Enable reduced timeout for non TCP/UDP/ICMP connections	bool	false
Aggressive aging - Enable reduced timeout for non TCP/UDP/ICMP connections	bool	false
Aggressive aging - ICMP connections reduced timeout	int	3
Aggressive aging - Memory consumption percentage limit	int	80
Aggressive aging - Other IP protocols reduced timeout	int	15
Aggressive aging - Pending Data connections reduced timeout	int	15
Aggressive aging - TCP handshake reduced timeout	int	5
Aggressive aging - TCP session reduced timeout	int	600
Aggressive aging - TCP termination reduced timeout	int	3
Aggressive aging - Tracking options for aggressive aging	options	Log
Aggressive aging - UDP connections reduced timeout	int	15
Anti ARP Spoofing - Anti ARP Spoofing mode	options	Off	Mode for Anti ARP spoofing protection. The protection can be turned off, on or in detect only mode
Anti ARP Spoofing - Detection window time to indicate attack	int	180	Time period (in seconds) during which IP addresses, assigned to the same MAC address, indicate an ARP spoofing attack
Anti ARP Spoofing - Number of IP addresses to indicate attack	int	3	The number of IP addresses assigned to the same MAC address during the Detection window time that will indicate an ARP spoofing attack
Anti ARP Spoofing - Suspicious MAC block period	int	1800	Time period (in seconds) during which suspicious MAC addresses are kept in the blocked list
Anti-Spam policy - All mail track	options	None	Indicates the tracking options for non-spam emails
Anti-Spam policy - Allowed mail track	options	None	Indicates the tracking options for emails that were explicitly allowed in the Exceptions page
Anti-Spam policy - Bypass timeout	int	0	Indicates the timeout (in seconds) of a POP3 inspection bypass mechanism. Bypass will be activated in case the inspection daemon is unavailable for the indicated time period. Relevant for POP3 and for Anti-Virus, Anti-Spam and Threat Emulation inspection. A value of zero means bypass is disabled.
Anti-Spam policy - Content based Anti-Spam timeout	int	10	Indicates the timeout (in seconds) to wait for an answer from the cloud during content-based Anti-Spam inspection
Anti-Spam policy - Email size scan	int	8	Indicates the maximal size of an email's content to scan (in KB)
Anti-Spam policy - IP reputation fail open	bool	true	Use Anti-Spam IP reputation fail-open mode upon internal error
Anti-Spam policy - IP reputation timeout	int	10	Indicates the timeout (in seconds) to wait for an IP reputation test result
Anti-Spam policy - Scan outgoing emails	bool	false	Scan the content of emails which are sent from the local network to the Internet
Anti-Spam policy - Transparent proxy	bool	true	Use a transparent proxy for inspected email connections
Anti-spoofing - Enable global anti-spoofing	bool	true	Indicates if anti-spoofing is enabled automatically on all interfaces according to their zone
Application Control and URL Filtering - Block when service is unavailable	bool	false	Block web requests traffic when the Check Point categorization and widget definitions online web service is unavailable
Application Control and URL Filtering - Categorize cached and translated pages	bool	true	Perform URL categorization of cached pages and translated pages created by search engines
Application Control and URL Filtering - Custom App over HTTPS	bool	false	Indicates whether custom URLs and applications will be matched over HTTPS traffic using SNI field. Important note: as SNI field in HTTPS traffic is browser-dependent and promiscuous, it does not guarantee 100% match.
Application Control and URL Filtering - Encrypt RAD Communication	bool	false	Indicates if the communication with the RAD cloud is encrypted
Application Control and URL Filtering - Enforce safe search	bool	false	Force filtering explicit content in search engines results
Application Control and URL Filtering - Fail Mode	options	Block all requests	Indicates the action to take on traffic in case of an internal system error or overload
Application Control and URL Filtering - Non-standard HTTP ports	bool	true	Enable HTTP inspection on non-standard ports for the Application Control or URLF blade
Application Control and URL Filtering - Track browse time	bool	true	Indicates if the total time that users are connected to different sites and applications in an HTTP session will be shown in relevant logs
Application Control and URL Filtering - Use HTTP referer header	bool	true	Indicates if the HTTP referer header is used by the inspection engine to improve application identification
Application Control and URL Filtering - Web site categorization mode	options	Background	Indicates the categorization mode: Background - requests are allowed until categorization is complete, Hold - requests are blocked until categorization is complete
Bypass CRL - Bypass CRL if the list exceeds the defined limit	long	10000
Capacity Optimization - Connections hash table size	int	131072	Indicates the size in bytes of the connections hash table
Capacity Optimization - Maximum concurrent connections	int	150000	Indicates the overall maximum number of concurrent connections
Cloud Services firmware upgrade - Service access maximum retries	int	3	Indicates the maximum number of retries when failing to upgrade using the service
Cloud Services firmware upgrade - Service access timeout until retry	int	180	Indicates the time to wait when a connection failure to the service before the next retry
Cluster - Restart the routed process upon failover	bool	false	Indicates if the main routing process is restarted upon cluster failover. This is more stable behavior but it prevents some features like graceful-restart for BGP and OSPF. Cluster must be re-configured for this setting to take effect. After re-configuring the cluster, all local cluster settings are reset to their defaults.
Cluster - Synchronization	bool	false	Indicates if the synchronization mechanism is enabled. Switching the flag from false to true may cause failover
Cluster - Use virtual MAC	bool	false	Indicates if a virtual MAC address will be used by all cluster members to allow a quicker failover by the network's switch
DDNS - iterations	int	2	Number of DNS updates
DHCP bridge - MAC assignment	options	Use internal interfaces mac	Indicates whether the MAC address for the DHCP bridge is taken from an internal (LAN) or external port (WAN, DMZ).
DHCP relay - Use internal IP addresses as source	bool	false	Indicates if DHCP relay packets from the appliance will originate from internal IP addresses
Firewall Policy - Connection Persistence	bool	false	Handling established connections when installing a new policy
Firewall Policy - Log implied rules	bool	false	Produce log records for connections that match implied rules
Hardware options - Reset to factory defaults timeout	int	12	Indicates the amount of time (in seconds) that you need to press and hold the factory defaults button on the back panel to restore to the factory defaults image
Hotspot - Enable portal	options	Enabled	Select 'Disabled' to disable the hotspot feature entirely
Hotspot - Prevent simultaneous log-in	bool	false	The same user will not be allowed to login via hotspot portal from more than one machine in parallel
IP Resolving - IP Resolving Activation	options	Enabled	Enable / Disable IP Resolving logs enrichment
IP Resolving - IP Resolving TTL	int	1800	The time (in seconds) for which the hostname resolution will be used
IP fragments parameters - Action	options	Allow	Indicates if IP fragments will be allowed or dropped by default
IP fragments parameters - Maximum fragments	int	200	Indicates how many IP fragments can arrive before discarding incomplete packets
IP fragments parameters - Minimum fragments size	int	0	IP Fragments minimum fragment size
IP fragments parameters - Packet Capture	bool	false	IP Fragments packet capture settings
IP fragments parameters - Timeout	int	1	Indicates the timeout (in seconds) before discarding incomplete packets
IP fragments parameters - Track options	options	Log	Indicates if and how to log IP fragments
IPS additional parameters - Max Ping Limit	int	1400	Indicates the maximal ping packet size that will be allowed when the 'Max Ping Size' protection is active
IPS additional parameters - Non-standard HTTP ports	bool	true	Enable HTTP inspection on non-standard ports for the IPS blade
IPS engine settings - Allow protocol unknown commands	bool	false	Indicates whether protocol commands, that are not completely supported by the inspection module, will be blocked or not
IPS engine settings - Apply filter	bool	true	Filter IPS protections to improve performance
IPS engine settings - Description	comments	Access denied due to IPS policy violation	A configured string to show in the error page if configured
IPS engine settings - Error page for supported web protections	options	Show pre-defined HTML error page	Indicates if IPS protections supporting an error page will show it upon attack prevention
IPS engine settings - HTML error page configuration	bool	false	Indicates if the error page will contain an error code
IPS engine settings - Logo URL	bool	false	Optionally enter a URL that leads to your company logo.
IPS engine settings - Logo URL address	urlv6		An accessible URL that leads to a logo file to show in the error page
IPS engine settings - Send detailed error code	bool	true	indicates if the error page will contain a configured string
IPS engine settings - Send error code	bool	false	Indicates if an error code will be sent to the other URL as a parameter
IPS engine settings - URL for redirection	urlv6		Users will be redirected to this URL upon detection of an attack
Internal Certificates configure - Internal CA certificate expiration	int	20	The number of years the internal CA certificate is valid
Internet - Path MTU Discovery Mode	options	Path MTU Discovery Mode - Disabled	Set Path MTU Discovery Mode (disabled, oneshot or daemon) for cellular connection
Internet - Reset Sierra USB on LSI error	bool	true	Indicates whether Sierra type USB modems will be reset when they send an Invalid LSI signal
IoT Stats - IoT Stats Activation	options	Disabled	Enable / Disable IoT collecting statistics
MAC Filtering settings - Log blocked MAC addresses	options	Enabled	Indicates if blocked MAC addresses should be logged or not
MAC Filtering settings - Log suspension	int	1	Indicates the suspension time (in seconds) between logs for blocked MAC addresses
Managed services - Allow seamless administrator access from remote Management Server	bool	true	Indicates if an administrator can access the appliance from a remote Security Management Server without the need to enter an administrator user name and password
Managed services - Disable logging to SD	bool	true	Disable logging to SD when SMP is on
Managed services - Show device details in Login	bool	true	Indicates if appliance details are shown when an administrator accesses the appliance
Mobile settings - Connect to the gateway from the following mobile app	options	Watch Tower	Which mobile app is used for this gateway
Mobile settings - Enable seamless login	bool	false	Allow users to do seamless login through the mobile app
Mobile settings - Notification cloud server URL	urlv6	https://smbcloud-api-gateway.iaas.checkpoint.com/notifications/mobile/send	Cloud server URL used for sending mobile notifications
Mobile settings - Pairing code expiration	int	1	Time left before pairing code expires (in hours)
Mobile settings - Verify SSL certificate	bool	true	Verify SSL certificate when sending mobile notifications to cloud server
Multiple ISP Route Refresh - Multiple ISP Route Refresh mode	bool	false	Indicates whether acceleration will refresh route in multiple ISPs configuration
NAT - ARP manual file merge	bool	false	Indicates, when automatic ARP detection is enabled, to use the ARP definitions in a local file with higher priority
NAT - Address allocation and release tracking	options	None	Specifies whether to log each allocation and release of an IP address from the IP Pool
NAT - Address exhaustion tracking	options	Log	Indicates whether or not to log and/or alert on exhaustion of IP pool
NAT - Automatic ARP detection	bool	true	Automatically detect ARP requests for external IP addresses of internal devices to be answered by the device
NAT - IP Pool NAT	options	Do not use IP pool NAT	IP pool NAT mode
NAT - IP pool per interface	bool	false	Uses an IP address pool for NAT per interface
NAT - Increase hide capacity	bool	true	Indicates if hide-NAT capacity is given additional space
NAT - NAT cache expiration	int	30	Indicates the expiration time in minutes for NAT cache entries
NAT - NAT cache number of entries	int	10000	Indicates the maximum number of NAT cache entries
NAT - NAT enable	bool	true	Indicates if the device's NAT capabilities are enabled
NAT - NAT hash size	int	0	Indicates the hash bucket size of NAT tables
NAT - NAT limit	int	0	Indicates the maximum number of connections with NAT
NAT - Perform cluster hide fold	bool	false	Indicates if local IP addresses will be hidden behind the cluster IP address when applicable
NAT - Prefer IP Pool NAT over hide NAT	bool	true	Overrides hide NAT with IP pool NAT
NAT - Return unused addresses to IP Pool NAT after	int	60	Return unused addresses to IP pool NAT
NAT - Reuse IP addresses from the Pool for different destinations	bool	false	Allows NAT to re-use IP addresses for different destinations
NAT - Translate destination on client side	bool	true	Translates destination IP addresses on client side (for automatically generated NAT rules)
NAT - Translate destination on client side (manual rules)	bool	true	Translates destination IP addresses on client side (for manually configured NAT rules)
NAT - Use IP Pool NAT for VPN clients connections	bool	false	Uses IP Pool NAT for VPN clients connections
NAT - Use IP Pool NAT for gateway to gateway connections	bool	false	Uses IP pool NAT for gateway to gateway connections
Notifications policy - Partition capacity threshold	int	95	Define the percentage for the partition capacity threshold (notifies when the partition is full)
Notifications policy - Send push notifications	bool	true	Indicates whether notifications are sent to mobile application
Notifications policy - The maximum number of notifications sent per hour	int	60	The maximum number of notifications sent to mobile devices per hour
OS advanced settings - Cellular Backoff Algorithm Mode	options	Auto	Set cellular backoff algorithm mode (auto, force-disable or force-enable). When in auto mode, backoff algorithm will only work for Rogers cellular carrier.
OS advanced settings - Cellular Network	options	Auto	Select the preferred cellular network mode - Auto, 4G only or 3G only
OS advanced settings - Cellular connection establish timeout	int	60	Indicates the timeout in seconds to wait for cellular connection to succeed
OS advanced settings - Cellular modem detection timeout	int	120	Indicates the timeout in seconds to wait for the cellular modem to be detected
OS advanced settings - Disable transfer of DHCP options from WAN to LAN	bool	false	Specifies whether transfer of DHCP options from WAN to LAN is disabled
OS advanced settings - Drop cellular outbound packets if the source IP is mismatched	bool	false	Drop cellular outbound packets if their source IP is not the interface IP
OS advanced settings - Enable LAN on WAN	bool	false	Specifies whether LAN-on-WAN feature is on
OS advanced settings - Enable Wi-Fi Monitors	bool	false	Specifies whether Wi-Fi monitors are on
OS advanced settings - Enable automatic Wi-Fi channel change	bool	false	Specifies whether Wi-Fi switches channels automatically during operation
OS advanced settings - Enable destination check on PPPoE	bool	false	Specifies whether PPPoE destination check is enabled
OS advanced settings - Enable flow-control for network switch	bool	false	Indicates if flow-control is enabled for network switch
OS advanced settings - IPv6 prefix selection mode	options	Router preference - oldest	Set the IPv6 prefix selection mode - in dynamic IPv6 Internet connections.
OS advanced settings - Reset cellular modem if not detected	bool	true	Indicates whether to reset the cellular modem if it fails to be detected
OS advanced settings - Use secondary MCCMNC file	bool	false	Set the use of the secondary MCCMNC file to automatically configure the APN from the extended secondary list.
OS advanced settings - Use unique ICMP ID	bool	false	Use unique ICMP ID per destination in connection monitoring
Operating system - General temporary directory size	int	20	Controls the size (in MB) of the temporary directory that is used by the system
Operating system - System temporary directory size	int	40	Controls the size (in MB) of the temporary directory that is used by the system
Privacy settings - Help us improve product experience by sending data to Check Point	bool	true	Privacy statement: Check Point does not upload data that contains private or sensitive information. For more information, refer to sk120332.
Privacy settings - Location service requires sending your IP address to 3rd party	bool	false	Using automatic timezone feature requires sending your IP address to 3rd party.
Privacy settings - Proactive collection of device details	bool	true	Proactively collect information on devices connected to the local network, which will be displayed in the Active Devices page
Privacy settings - Share device information with IoT cloud	bool	false	Share device information with IoT cloud in order to enforce policy based on IoT profiles
QoS blade - Logging	bool	true	Indicates if the appliance logs QoS events when the QoS blade is enabled
Reach My Device - Ignore SSL certificate	bool	false	Ignore SSL certificate when running Reach My Device
Reach My Device - Server address	urlv6	smbrelay.checkpoint.com	Indicates the address of the remote server that allows administration access to the appliance from the internet even when behind NAT
Report Settings - Max period	options	Monthly	Maximum period to collect and monitor data in local management. You must reboot your appliance to apply changes.
Report Settings - Reports cloud server URL	urlv6	https://smbcloud-api-gateway.iaas.checkpoint.com/reports/pdf	Reports cloud server URL used to generate report PDF
Report Settings - Send empty report	bool	false	Indicates if the report should be sent even if it is empty
Rest API - Rest API mode	bool	false	Indicates where REST API is enable or not
SSL inspection policy - Additional HTTPS ports	port-range	8080,3128	Additional HTTPS ports for SSL inspection (a comma separated list of ports/ranges)
SSL inspection policy - Enable ICA Portal	bool	true	Indicates if ICA Portal is enabled
SSL inspection policy - Log empty SSL connections	bool	false	Log connections that were terminated by the client before data was sent - might indicate the client did not install CA certificate
SSL inspection policy - Retrieve intermediate CA certificates	bool	true	Indicates if the SSL inspection mechanism performs its validations on all intermediate CA certificates in the certificate chain
SSL inspection policy - SSL inspection categorization mode	options	Hold	Indicates the categorization mode of SSL inspection: Background - Requests are allowed until categorization is complete, Hold - Requests are blocked until categorization is complete
SSL inspection policy - Track validation errors	options	Log	Select if the SSL inspection validations are tracked
SSL inspection policy - Trusted CA Auto Update Enabled	bool	true
SSL inspection policy - Validate CRL	bool	true	Indicates if the SSL inspection mechanism will drop connections that present a revoked certificate
SSL inspection policy - Validate Expiration	bool	false	Indicates if the SSL inspection mechanism will drop connections that present an expired certificate
SSL inspection policy - Validate unreachable CRL	bool	false	Indicates if the SSL inspection mechanism will drop connections that present a certificate with an unreachable CRL
SSL inspection policy - Validate untrusted certificates	bool	false	Indicates if the SSL inspection mechanism will drop connections that present an untrusted server certificate
Serial port - Enable serial port	options	Enabled	Indicates if the serial port is enabled
Serial port - Port speed	options	115200	Indicates the port speed (Baud Rate) of the serial connection
Smart Accel Services - Security logs enabled	bool	false	Indicates whether Smart Accel security logs are enabled
Smart Accel Settings - Accel Trusted HTTPS Domains Only	bool	true	Indicates whether to accel only trusted HTTPS domains
Smart Accel Settings - Ignore Errors	bool	false	Ignore conflicts related to Smart Accel and firewall policy rules
Stateful Inspection - Accept out of state TCP packets	int	1	Indicates if TCP packets which are not consistent with the current state of the TCP connection are dropped (when set to 0) or accepted (when set to any other value)
Stateful Inspection - Accept stateful ICMP Errors	bool	true	Accept ICMP error packets which refer to another non-ICMP connection that was accepted by the Rule Base
Stateful Inspection - Accept stateful ICMP Replies	bool	true	Accept ICMP reply packets for ICMP requests that were accepted by the Rule Base
Stateful Inspection - Accept stateful UDP replies for unknown services	bool	true
Stateful Inspection - Accept stateful other IP protocols replies for unknown services	bool	true	Accept stateful non TCP/UDP protocols replies for unknown services
Stateful Inspection - Allow IPv6 packets	bool	false	Allow IPv6 traffic to pass without inspection
Stateful Inspection - Drop out of state ICMP packets	bool	true	Drop ICMP packets which are not in the context of a virtual session
Stateful Inspection - ICMP virtual session timeout	int	30	Indicates the timeout (in seconds) for ICMP virtual sessions
Stateful Inspection - Log dropped out of state ICMP packets	int	1
Stateful Inspection - Log dropped out of state TCP packets	int	1
Stateful Inspection - Other IP protocols virtual session timeout	int	60	Indicates the timeout (in seconds) for other IP protocols virtual sessions (non TCP/UDP/ICMP)
Stateful Inspection - Perform deep packet inspection on LAN to LAN traffic	bool	false
Stateful Inspection - Perform deep packet inspection on traffic between LAN and DMZ networks	bool	false
Stateful Inspection - TCP end timeout	int	20	Indicates the timeout (in seconds) for TCP session end
Stateful Inspection - TCP session timeout	int	3600	Indicates the timeout (in seconds) for TCP sessions
Stateful Inspection - TCP start timeout	int	25	Indicates the timeout (in seconds) for TCP session start
Stateful Inspection - UDP virtual session timeout	int	40	Indicates the timeout (in seconds) for UDP virtual sessions
Stateful Inspection - traceroute maximal TTL	int	29	Maximal value for TTL field for a packet to be considered as a traceroute
Streaming engine settings - Stream Inspection Timeout action	options	Prevent	Stream Inspection Timeout activation mode
Streaming engine settings - Stream Inspection Timeout tracking	options	Log
Streaming engine settings - TCP Invalid Checksum action	options	Prevent	TCP Invalid Checksum activation mode
Streaming engine settings - TCP Invalid Checksum tracking	options	None
Streaming engine settings - TCP Invalid Retransmission action	options	Prevent	TCP Invalid Retransmission activation mode
Streaming engine settings - TCP Invalid Retransmission tracking	options	Log
Streaming engine settings - TCP Out of Sequence action	options	Prevent	TCP Out of Sequence activation mode
Streaming engine settings - TCP Out of Sequence tracking	options	None
Streaming engine settings - TCP SYN Modified Retransmission action	options	Prevent	TCP SYN Modified Retransmission activation mode
Streaming engine settings - TCP SYN Modified Retransmission tracking	options	Log
Streaming engine settings - TCP Segment Limit Enforcement action	options	Prevent	TCP Segment Limit Enforcement activation mode
Streaming engine settings - TCP Segment Limit Enforcement tracking	options	Log
Streaming engine settings - TCP Urgent Data Enforcement action	options	Prevent	TCP Urgent Data Enforcement activation mode
Streaming engine settings - TCP Urgent Data Enforcement tracking	options	Log
Threat Prevention Anti-Bot policy - Resource classification mode	options	Hold	Indicates the classification mode for the Anti-Bot engine: Background - connections are allowed until classification is complete, Hold - connections are blocked until classification is complete
Threat Prevention Anti-Virus policy - File scan size limit	int	0	Indicates the size limit (in KB) of a file scanned by the Anti-Virus engine. To specify no limit, set to 0.
Threat Prevention Anti-Virus policy - MIME maximum nesting level	int	7	Indicates the maximum number of levels in nested MIME content that the ThreatSpect engine scans in mail traffic
Threat Prevention Anti-Virus policy - MIME nesting level exceeded action	options	Block	Indicates if an email should be blocked or accepted if there are more nested levels of MIME content than the configured amount
Threat Prevention Anti-Virus policy - Priority scanning	bool	true	Scan according to security and performance priorities for maximum optimization
Threat Prevention Anti-Virus policy - Resource classification mode	options	Hold	Indicates the classification mode for the Anti-Virus engine: Background - connections are allowed until classification is complete, Hold - connections are blocked until classification is complete
Threat Prevention Threat Emulation policy - Emulation connection handling mode - IMAP	options	Background - connections are allowed until emulation handling is complete	Indicates the strictness mode of the Threat Emulation engine over IMAP: Background - connections are allowed while the file emulation runs (if needed), Hold - connections are blocked until the file emulation is completed
Threat Prevention Threat Emulation policy - Emulation connection handling mode - POP3	options	Background - connections are allowed until emulation handling is complete	Indicates the strictness mode of the Threat Emulation engine over POP3: Background - connections are allowed while the file emulation runs (if needed), Hold - connections are blocked until the file emulation is completed
Threat Prevention Threat Emulation policy - Emulation connection handling mode - SMTP	options	Background - connections are allowed until emulation handling is complete	Indicates the strictness mode of the Threat Emulation engine over SMTP: Background - connections are allowed while the file emulation runs (if needed), Hold - connections are blocked until the file emulation is completed
Threat Prevention Threat Emulation policy - Emulation location	options	Emulation is done on Public Threat Cloud	Indicates if emulation is done on Public Threat Cloud or on remote (private) SandBlast
Threat Prevention Threat Emulation policy - Primary Emulation gateway	ipv4addr		The IP address of the primary remote emulation gateway
Threat Prevention policy - Allow IP address information in attack statistics	bool	false	Allow IP address information in attack statistics sent to my User Center account
Threat Prevention policy - Allow me to view attack statistics in my User Center account	bool	false	Allow me to view attack statistics in my User Center account. Note that privacy settings should be set to allow sending data to Check Point
Threat Prevention policy - Block when service is unavailable	bool	false	Block web requests traffic when the Check Point ThreatCloud online web service is unavailable
Threat Prevention policy - Fail mode	options	Allow all requests	Indicates the action to take on traffic in case of an internal system error or overload
Threat Prevention policy - File inspection size limit	int	0	Indicates the size limit (in KB) of a file inspected by Threat Prevention engines. Note: A limit too low may have an impact on the functionality of the Application Control blade. To specify no limit, set to 0.
Threat Prevention policy - Method for skipping HTTP inspection	options	Default	When changed from the default value, and file size inspection limit is used, HTTP inspection will be fully skipped instead of skipping only a single session. This is not recommended due to a high security impact as the following sessions will not be inspected at all following a large file sent via HTTP on a single connection.
Threat Prevention policy - Update Threat Prevention With Full Packages	bool	false	Update Threat Prevention with the most up to date Packages
Two-Factor Authentication - Enable selection of target where to send the passcode (SMS/email)	bool	false	If set to true, the target selection (SMS/email) is displayed to the user
USB modem watchdog - Interval	int	5	Indicates how often the USB modem watchdog probes the internet
USB modem watchdog - Mode	options	Disabled	Indicates if the USB modem watchdog is enabled when internet probing is enabled, and the reset type (either hard-reset to shut down the power for the USB modem or gateway-reset to reboot the gateway itself).
USB modem watchdog - USB only	bool	false	Monitor only USB modem connection
Update Services Schedule - Maximum number of retries	int	3	Indicates the maximum number of retries for a single update when the cloud is unavailable until the next scheduled update
Update Services Schedule - Timeout until retry	int	180	Indicates the timeout (in seconds) until update retry
User Awareness - Active Directory association timeout	int	720	Indicates the timeout (in minutes) for caching an association between a user and an IP address
User Awareness - Allow DNS for unknown users	bool	true	The default is to allow DNS for unknown users even when configured to be blocked in Browser Based Portal settings
User Awareness - Assume single user per IP address	bool	true	Indicates a mode where per IP address, only the last user who logged is identified
User Awareness - Log blocked unknown users	bool	true	Indicates if a log should be issued when unknown users are blocked (see Browser Based Portal settings)
User Awareness - Use NTLMv2 protocol for Active Directory Queries	bool	false	NTLMv2 mode - true for using NTLMv2, false for using NTLMv1
User Management - Automatically delete expired local users	bool	false	Automatically delete all expired local users every 24 hours (after midnight)
UserCheck Portal - Redirect Address	string		Configure this parameter only when locally managed GW is configured in bridge mode and tag based VLAN traffic is passing through it. Use local address which isn't under the bridge
VPN Remote Access - Allow clear Traffic while disconnected	bool	true	Indicates how traffic to the VPN domain is handled when the Remote Access VPN client is not connected to the site; sent in clear or dropped
VPN Remote Access - Allow simultaneous login	bool	true	If disabled, and the same user logs in for a second time, it will disconnect his existing session
VPN Remote Access - Authentication timeout	int	120	Indicates for how much time (in minutes) the remote client's password remains valid if timeout is enabled
VPN Remote Access - Auto-disconnect in VPN domain	bool	true	Indicates if the client disconnects automatically to save resources when it connects from inside the secured internal network (local encryption domain)
VPN Remote Access - Back connections enable	bool	false	Enable back connections from the encryption domain behind the gateway to the client
VPN Remote Access - Back connections keep-alive interval	int	20	Indicates the interval (in seconds) between keep-alive packets to the gateway required for gateway to client back connections
VPN Remote Access - Enable Visitor Mode on All Interfaces	options	All	Enable visitor mode on all interfaces
VPN Remote Access - Enable Visitor Mode on This Interface	ipv4addr	0.0.0.0	Support visitor mode on this interface
VPN Remote Access - Encrypt DNS traffic	bool	true	Indicates if DNS queries sent by the remote client to a DNS server located in the encryption domain are passed through the VPN tunnel
VPN Remote Access - Encryption Method	options	IKEv1	Indicates which IKE encryption method (version) is used for IKE phase 1 and 2
VPN Remote Access - Endpoint Connect re-authentication timeout	int	480	Indicates the time (in minutes) until the Endpoint Connect user's credentials are resent to the gateway to verify authorization
VPN Remote Access - IKE IP Compression Support	bool	false	Indicates if IPSec packets from remote access clients will be compressed
VPN Remote Access - IKE Over TCP	bool	false	Enables support of IKE over TCP
VPN Remote Access - IKE restart recovery	bool	true	Indicates that the gateway will save tunnel details so it can cause the remote client to discard the old SA and re-initiate IKE upon gateway crash or restart
VPN Remote Access - Legacy NAT traversal	bool	true	Indicates if the Check Point proprietary NAT traversal mechanism (UDP encapsulation) is enabled for SecureClient
VPN Remote Access - Match on Internal rulebase only	bool	false	Traffic from Remote Access clients will always be matched on the Incoming/Internal/VPN rulebase, including traffic to the Internet
VPN Remote Access - Minimum TLS version support in the SSL VPN portal	options	TLS 1.2	Indicates the minimum TLS protocol version which the SSL VPN portal supports. For security reasons, it's recommended to support TLS 1.2 and above.
VPN Remote Access - Office Mode Enable With Multiple Interfaces	bool	false	Indicates if a mechanism (with a performance impact) to improve connectivity between remote access client and an appliance with multiple external interfaces is enabled
VPN Remote Access - Office Mode Perform Antispoofing	bool	false	Office Mode - Perform Anti-Spoofing on Office Mode addresses
VPN Remote Access - Office Mode allocate from RADIUS	bool	false	Indicates if the Office Mode allocated IP addresses will be taken from the RADIUS server used to authenticate the user
VPN Remote Access - Office Mode disable	bool	false	Indicates if Office Mode (allocating IP addresses for Remote Access clients) is disabled. This is not recommended.
VPN Remote Access - Prevent IP NAT Pool	bool	false	Prevent IP Pool NAT configuration from being applied to Office Mode users. This is needed when using SecureClient as well as other VPN clients.
VPN Remote Access - RADIUS retransmit timeout	int	5	Timeout interval (in seconds) for each RADIUS server connection attempt
VPN Remote Access - Remote Access port	port	443	Select the port to which Remote Access clients connect, and SSL VPN Network extender portal uses
VPN Remote Access - Reserve port 443 for port forwarding	bool	false	Reserving port 443 for port forwarding (port 443 will not be used for Remote Access and SSL VPN Network extender)
VPN Remote Access - SNX keep-alive interval	int	20	Indicates the time (in seconds) between the SSL Network Extender client keep-alive packets
VPN Remote Access - SNX re-authentication timeout	int	480	Indicates the time (in minutes) between re-authentication of SSL Network Extender remote access users and Check Point Mobile VPN users
VPN Remote Access - SNX support 3DES	bool	true	Indicates if the 3DES encryption algorithm will be supported in SSL clients as well as the default algorithms
VPN Remote Access - SNX support RC4	bool	true	Indicates if the RC4 encryption algorithm will be supported in SSL clients as well as the default algorithms
VPN Remote Access - SNX uninstall	options	Do not uninstall	Indicates when and if the SSL Network Extender client will uninstall itself upon disconnection
VPN Remote Access - SNX upgrade	options	Ask user	Indicates when and if the SSL Network Extender client will upgrade itself upon connection
VPN Remote Access - Single Office Mode Per Site	bool	false	Use first allocated Office Mode IP Address for all connections to the Gateways of the site
VPN Remote Access - Topology updates manual interval	int	168	Indicates the manually configured interval (in hours) for topology updates to the clients. Will be applicable only if the override settings is set to true.
VPN Remote Access - Topology updates override	bool	false	Indicates if the configured topology updates settings will override the default 'once a week' policy
VPN Remote Access - Topology updates upon startup only	bool	true	Indicates if topology updates will occur only when the client starts. Will be applicable only if the override settings is set to true.
VPN Remote Access - Verify device certificate	bool	true	Client will verify the device's certificate against revocation list
VPN Remote Access - block user if belongs to at least one group without permission	bool	false	Indicates if strict group permissions are enabled - user will not have remote access permission if belongs to at least one group without remote access permission
VPN Site to Site global settings - Accept NAT Traversal	bool	true	Indicates if industry standard NAT traversal (UDP encapsulation) is enabled. This enables VPN tunnel establishment even when the remote site is behind a NAT device.
VPN Site to Site global settings - Administrative notifications	options	Log	Indicates how to log an administrative event (for example, when a certificate is about to expire)
VPN Site to Site global settings - Bypass PSL inspection for VPN traffic	bool	false	Indicates if PSL inspection (Application Control, URL Filtering, IPS, Anti-Virus, Anti-Bot, Threat Prevention, Threat Emulation) is bypassed for VPN traffic
VPN Site to Site global settings - Check validity of IPSec reply packets	bool	false
VPN Site to Site global settings - Cluster SA sync packets threshold	long	200000	Sync SA with other cluster members when packets number reaches this threshold
VPN Site to Site global settings - Collect VPN monitoring data for SMP Heartbeat	bool	true	Applies only to a Cloud Services managed appliance. Collecting VPN monitoring data to a dedicated file for SMP Heartbeat
VPN Site to Site global settings - Copy DiffServ mark from encrypted/decrypted IPSec packet	bool	false
VPN Site to Site global settings - Copy DiffServ mark to encrypted/decrypted IPSec packet	bool	true
VPN Site to Site global settings - DPD triggers new IKE negotiation	bool	true
VPN Site to Site global settings - Delete IKE SAs from a dead peer	bool	true
VPN Site to Site global settings - Delete IPsec SAs on IKE SA delete	bool	false
VPN Site to Site global settings - Delete tunnel SAs when Tunnel Test fails	bool	true	When permanent VPN tunnels are enabled and a Tunnel Test fails, delete the relevant peer's tunnel SAs. Not supported in High Availability Cluster mode
VPN Site to Site global settings - Do not encrypt connections originating from the local gateway	bool	false	Exclude the Internet connection's IP address from the local encryption domain. Packets whose original source or destination IP address is the local gateway's Internet connection IP address will not go through a VPN tunnel. This parameter may be useful when the gateway is behind hide NAT.
VPN Site to Site global settings - Do not encrypt local DNS requests	bool	false	When enabled, DNS requests originating from the appliance will not be encrypted. Relevant when a configured DNS server is in a VPN peer's encryption domain.
VPN Site to Site global settings - Enable encrypted packets rerouting	bool	true	Indicates if encrypted packets will be rerouted through the best interface according to the peer's IP address or probing. It is not recommended to change this value to false.
VPN Site to Site global settings - Grace period after CRL is no longer valid	int	1800	Indicates the time (in seconds) after which a revoked certificate of a remote site remains valid, to allow wider window for CRL validity in case of clock mismatch
VPN Site to Site global settings - Grace period before CRL is valid	int	7200	Indicates the time window (in seconds) where a certificate is considered valid prior to the time set by the CA, to allow wider window for CRL validity in case of clock mismatch
VPN Site to Site global settings - Harmony Connect VPN High Availability timeout (sec)	int	30	Timeout - The amount of idle time (sec) before switching to another Harmony Connect VPN (0 to disable High Availability)
VPN Site to Site global settings - IKE DoS from known sites protection	options	None	Indicates if the IKE DoS from known IP addresses protection is active and the method by which it detects potential attackers
VPN Site to Site global settings - IKE DoS from unknown sites protection	options	None	Indicates if the IKE DoS from unidentified IP addresses protection is active and the method by which it detects potential attackers
VPN Site to Site global settings - IKE reply from Same IP	bool	true	Indicates if the source IP address used in IKE session will be according to destination when replying to incoming connections, or according to the general source IP address link selection configuration
VPN Site to Site global settings - IKEV2 Key Type	options	Key ID	Key type use for IKEV2 communication
VPN Site to Site global settings - Indicates the interval in which a VPN tunnel down summary notification is sent	options	1 Hour	Applies only when collect VPN monitoring data for SMP Heartbeat is enabled
VPN Site to Site global settings - Join adjacent subnets in IKE Quick Mode	bool	true
VPN Site to Site global settings - Keep DF flag on packet	bool	false	Indicates if the 'Don't Fragment' flag is kept on the packet during encryption/decryption
VPN Site to Site global settings - Keep IKE SA Keys	options	Automatic
VPN Site to Site global settings - Key exchange error tracking	options	Log	Indicates how to log VPN configuration errors or key exchange errors
VPN Site to Site global settings - Match Internet traffic on the Outgoing rulebase	bool	false	Traffic to the Internet from VPN peers that route all their traffic through this gateway, will be matched on the Outgoing rulebase
VPN Site to Site global settings - Maximum concurrent IKE negotiations	int	200	Indicates the maximum number of concurrent VPN IKE negotiations
VPN Site to Site global settings - Maximum concurrent tunnels	int	10000	Indicates the maximum number of concurrent VPN tunnels
VPN Site to Site global settings - Maximum number of VPN tunnel down notifications per hour	int	5	Applies only when collect VPN monitoring data for SMP Heartbeat is enabled
VPN Site to Site global settings - Open SAs limit	int	20	Indicates the maximum number of open SAs per VPN peer
VPN Site to Site global settings - Outgoing link tracking	options	None	Logging of the outgoing VPN link: Log, don't log or alert
VPN Site to Site global settings - Override 'Route all traffic to remote VPN site' configuration for admin access to the device	bool	true	Exclude admin access traffic to the gateway from being routed to remote VPN site even if all traffic should be routed to it
VPN Site to Site global settings - Packet handling errors tracking	options	Log	Logging for VPN packet handling errors: Log, don't log or alert
VPN Site to Site global settings - Perform Tunnel Tests using an internal IP address	bool	false	Perform Tunnel Tests using an internal IP address which is part of the local encryption domain.
VPN Site to Site global settings - Permanent tunnel down tracking	options	Log	Logging for when the tunnel goes down: Log, don't log or alert
VPN Site to Site global settings - Permanent tunnel up tracking	options	Log	Logging for when the tunnel goes up: Log, don't log or alert
VPN Site to Site global settings - RDP packet reply timeout	int	10	Timeout (in seconds) for an RDP packet reply
VPN Site to Site global settings - Reply from incoming interface	bool	false	When tunnel is initiated from remote site, reply from the same incoming interface when applicable (IKE and RDP sessions)
VPN Site to Site global settings - Successful key exchange tracking	options	Log	Logging for VPN successful key exchange: Log, don't log or alert
VPN Site to Site global settings - Use cluster IP address for IKE	bool	true	Indicates if IKE is performed using cluster IP address (when applicable)
VPN Site to Site global settings - Use internal IP address for encrypted connections from local gateway	bool	false	Encrypted connections originating from the local gateway will use an internal interface's IP address as the connection source
VPN Site to Site global settings - VPN Tunnel Sharing	options	subnets	Indicates under what conditions new tunnels are created, controlling the number of tunnels: per host pair, per subnet (Industry Standard) or a single tunnel per remote site/gateway
VoIP - Accept MGCP connections to registered ports	bool	false	Indicates if deep inspection over MGCP traffic will automatically accept MGCP connections to registered ports
VoIP - Accept SIP connections to registered ports	bool	false	Indicates if deep inspection over SIP traffic will automatically accept SIP connections to registered ports
Web Interface Settings and Customizations - Company URL	urlv6WithHttp		Clicking the company logo in the web interface opens this URL
Web Interface Settings and Customizations - Use a company logo in the appliance's web interface	bool	false	The company logo is displayed on the appliance's web interface and on its log-in page. The customized logo should follow the size restrictions in order to be displayed properly.