Number of Users currently connected to SMB via RA VPN client

[G_W_Albrecht]

The sk102803 explains how you can see the number of users currently connected via Client-to-Site VPN on CLI of a Locally Managed 600/700/1100/1200R/1400 appliances.

1. Connect over SSH to the Locally Managed appliance and log in to Expert mode.
2. Run the following command:

# pep show user all

This will display a table containing all users which are currently connected with their corresponding IP addresses (in Hexadecimal format).

[Vladimir_S]

Hello, 

I attempted to run "pep show user all", but out put was "daemon did not respond or not running!". Any suggestions?

[HristoGrigorov]

@Vladimir_S Do you have IA blade enabled ?

[Vladimir_S]

Identity Awareness blade enabled, but not configured.

[SSlater · Accepted solution]

I would say more specifically, that this command provides all identified users that are being enforced by Identity Awareness blade.

  - Identity Awareness will need to be configured for this to work as expected.