Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
mhmdmahdi
Contributor
Jump to solution

Load balance 3 isp on SMB appliance (Quantum Spark 1600)

Hi all, I'm new to checkpoint firewall.

I just need a quick answer is it possible to load balance 3 connection from different isp? If it is possible, what port need to be configured? Are there any reference for the setup?

Thank you very much.

0 Kudos
2 Solutions

Accepted Solutions
mhmdmahdi
Contributor

Hi, thank you for the response.

 

On the admin guide also said:

"LAN. You can also use unassigned LAN ports with no VLANs for internet connections. When you delete the internet connection, the port reverts to an unassigned LAN."

 

Does it mean I can use LAN interface for the 3rd internet connection?

View solution in original post

0 Kudos
G_W_Albrecht
Legend
Legend

Yes, this feature is called Multi-WAN (FleXi Ports) and came with R77.20.81.

CCSE CCTE CCSM SMB Specialist

View solution in original post

0 Kudos
5 Replies
_Val_
Admin
Admin

I think it is possible with two but not three ISPs with Quantum Spark.

Look up here: https://sc1.checkpoint.com/documents/SMB_R80.20.40/AdminGuides/Locally_Managed/EN/Topics/Configuring...

 

G_W_Albrecht
Legend
Legend

The Admin Guide refered to above has:

You can create a maximum of 32 internet connections. This includes alias IP connections.

CCSE CCTE CCSM SMB Specialist
mhmdmahdi
Contributor

Hi, thank you for the response.

 

On the admin guide also said:

"LAN. You can also use unassigned LAN ports with no VLANs for internet connections. When you delete the internet connection, the port reverts to an unassigned LAN."

 

Does it mean I can use LAN interface for the 3rd internet connection?

0 Kudos
G_W_Albrecht
Legend
Legend

Yes, this feature is called Multi-WAN (FleXi Ports) and came with R77.20.81.

CCSE CCTE CCSM SMB Specialist
0 Kudos
mhmdmahdi
Contributor

Ohh I see.

 

Thanks for the information.

0 Kudos