Hi @Jon_AK
Two things came into my mind:
- Maybe tcp443 and tcp80 is a restricted port for the SMB appliances from outside, therefore the connection won't work for them, and work only for tcp8081.
- If we talk about reaching servers from outside, I use Static NAT setting.
Types of NAT Methods
Static:
The Security Gateway changes the source IP address of all connections from a source to the IP address your configure.
Notes:
When you configure Static NAT, the Security Gateway allows external traffic to access internal resources.
If you enable this configuration in an object that represents one IP address (a Host object), then this gives you a one-to-one address translation.
If you enable this configuration in an object that represents many IP addresses (a Network object, an Address Range object), then this gives you a many-to-one address translation.
The Security Gateway translates each internal IP address to a different external IP address.
Important - The range of the translated IP addresses is the same as the range of the source IP addresses.
Cheers,
Akos
----------------
\m/_(>_<)_\m/