Firmware Safe@Office 500WP

[Berserkme]

Hi everyone I have an older firewall "Safe@Office 500WP"

I have reset it to factory default.

Unfortunately, I have switched back to an older firmware.
Where can I download the latest firmware from 2013? (ideally 8.0.39x)
The sofaware site no longer exists, and I haven't found anything on checkpoint.

I'm well aware that this is an obsolete product 😉

[G_W_Albrecht]

What is the use case ? What to do with 15 year old hardware without Support, TP or anything ? Are you aware that you have to use a TFTP server for firmware upgrade ? I do still have an archive with versions from 7.5.55x to 8.1.46x, though...

[Berserkme]

I'm well aware that the product is obsolete.
In my company, we have 4 models waiting to be replaced.
but it won't be until the end of 2024.
my superior has asked me to make clones of the models in operation, in case they break down.
we still have some in stock.
In the admin area, I can download the update directly.

Warning: I made a mistake, the models are safe@office 500 and not safe@office 500WP.

[G_W_Albrecht · Accepted solution]

500 had end of support

31-May-2015

last firmware is 8.2.55

Anyway, new firmware installation is only possible with a valid support contract.

[Berserkme]

Thank you for your answers.
I'm going to explain to my boss to make up his mind.

[PhoneBoy · Accepted solution]

A few years ago, I think, they removed most/all of the old Safe@ firmware from SupportCenter.
With the move to the new SupportCenter several months ago, you probably won't find it.
That leaves the TAC (assuming you have a support agreement) or possibly your local Check Point SE as the best sources for this.