Fast Accel is not working in QS 1800

[JDCasCruz]

Hello team,

We are trying to use the Secure XL Fast Accel feature on our 1800 Gateways. For this we followed sk156672, enabled the feature and created a general rule to speed up user traffic to the proxy, installed the policies and nothing happened with the hit count after a few days (attached image).

Can someone help us to know what is wrong?

We're wotking with a Cluster XL with two 1800 in high availability, the OS version is R81.10.10 945. We work only with the FW blade.

Quantum Spark (SMB) 

Regards.

[G_W_Albrecht]

Afaik this is not a GAiA Embedded feature, here we only have Smart Accel:

https://sc1.checkpoint.com/documents/SMB_R81.10.X/AdminGuides_Locally_Managed/EN/Content/Topics/Smar...

https://sc1.checkpoint.com/documents/SMB_R81.10.X/CLI/EN/Content/Topics/Configuring-Smart-Accel-Sett...

...and only on locally managed SMBs. As sk156672 does not cover any SMB firmware versions, there is a reason to assume that.

[JDCasCruz]

This would be bad, but could it be confirmed somehow?

[G_W_Albrecht]

Look into https://sc1.checkpoint.com/documents/SMB_R81.10.X/CLI/EN/Content/Topics/Configuring-Smart-Accel-Sett... for configuration of Smart Accel.

And that is what it is - you can always open an informational SR# with CP TAC, if you need official confirmation, but:

- sk156672 only mentions GAiA systems, not GAiA Embedded

- Smart and Fast Accel on SMB would rather be a kind of overkill, a second Accel function does not make sense, especially on SMB....

[Timothy_Hall]

Also bear in mind that if the traffic has to go F2F/slowpath for some reason, fast-accel will not work.  Only Medium Path (passive & active streaming) can be forced into the fastpath with fast-accel. On R81+ standard gateways you can use the command fw tab -u -t connections -z to see what connections are F2F/slowpath and the reason they are being handled there; not sure if this command works on SMB or what the equivalent command would be.

[JDCasCruz]

The command works, I am getting a quite reasonable output, where the connections from users to the proxy look like this:

localhost:
Dir Source IP SPort Destination IP DPort PR FW State
--- --------------- ----- --------------- ----- -- ---------------
1 userIP 55923 ProxyIP 8080 6 Link

And also by executing the command “fwaccel conns” I can see the connections from users to the proxy.

[PhoneBoy]

The sk does not explicitly mention if fast_accel is supported on Quantum Spark or not.
@Amir_Ayalon ?

[Amir_Ayalon]

Hi Guys

Fast Accel suppose to be supported on Spark.

See screenshot for configuration on locally managed.

on centrally managed it is also suppose to work. if it doesn't please open a Task and we will look into it

thanks