Do SMB Appliances have limited SNMP functions

[morris]

Hi there,

we want to monitor the VPN-tunnel state of a S2S-tunnel of a 1100 SMB with SNMP.

Regarding to the Best-Practice Guide and sk63663 the OID is 

1.3.6.1.4.1.2620.500.9002.1.3

After many tries I started a snmpwalk. 
But there is no output with "snmpwalk 1.3.6.1.4.1.2620.500"

I couldn't check the OID with a fullsize Appliance. So the question I aks myself is:

Do SMB Appliances have limited SNMP functions?

Best regards,

[PhoneBoy]

The only limitation I am aware of on these appliances is the inability to create custom OIDs: Cannot create custom OID on Check Point 600 / 700 / 1100 / 1200R / 1400 SMB Appliances 

I recommend engaging with the TAC: Contact Support | Check Point Software 

[David_C1]

I found this thread while fighting with snmp on a centrally managed 1570R running R81.10.08. The same problem still exists, trying to pull anything in .1.3.6.1.4.1.2620.500 fails.

Just a little frustrating.

Dave