DHCP-Reservation missing in SMB appliance

[skandshus]

Has anybody seen this issue before?

check attached photos.

i've got 2 SMB appliances working fine with DHCP reservation option available.

Now i am preparing a 3rd device, but the option to dhcp-reserver when creating an object is missing for me all of the sudden.

[796570686578]

What Version do you have installed on the gateways? Is it possible that the new SMB Appliance is on an older Software version and therefore doesn't have the future yet?

[PhoneBoy]

That feature has been there from the beginning.
That said, you may want to make sure you're on the latest firmware: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...
Are you following the exact same procedure on all three appliances?

[skandshus]

I am/was in 80.20.30  apparently a hot fix I received to fix an issue just created another problem.. also coinciding with the hot fix, was that it was causing remote access and site to site vpn to drop after some hours of operation causing a need for reboot..

I reset the appliance and went back to 80.20.15 instead..

[G_W_Albrecht · Accepted solution]

This is a bug in R80.20.30 - contact TAC and request firmware R80.20.30 Build 992002349 where this is fixed !

[skandshus]

I don’t have the courage to keep

upgrading with hot fixes.

though I’m surprised they haven’t pulled the upgrade..

[G_W_Albrecht · Accepted solution]

You still can define such objects using CLI, but you can not edit them in WebGUI.