Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Florian_Heindl
Contributor

Checkpoint 1400 - Change Browser Based Auth Portal Certificate when using SmartProvisioning

Hello,

 

at the Moment I'm configuring Identity Awarenes on Checkpoint 1400 Appliances which are managed via SmartProvisioning.

 

Is there any Chance to Change the Portal Certificate which will be automatically used for the Web Portal?

It allways automatically uses the created IPSEC VPN - Certificate which is very unusful because it was generated for the wrong common Name (<Gatewayname> VPN Certificate instead of the dynamic-IP).

 

It would be really great if there is some CLI command or anything else how I can use there my own Certificate for alle Provisioned appliances. Users won't get a Certificate error message when logging in via the WebPortal...

 

Thanks.

 

Regards

 

 

Florian

0 Kudos
3 Replies
G_W_Albrecht
Legend
Legend

Are you talking about the Hotspot portal, UserCheck or the WebGUI ? And what about recreating a correct Internal Certificate ?

0 Kudos
Florian_Heindl
Contributor

I'm talking about the webportal certificate which will be used from Identity Awareness in case of activated User Authentication via WebPortal. So about the certificate which will be used for the https://<dynamic-ip>/connect  URL. If I can recreate this internal Certificate with a individual defined common name attributes (IP - Address as common name) then that would be fine.

0 Kudos
G_W_Albrecht
Legend
Legend

The way to change this is in the GW IA settings:

certport.PNG

0 Kudos